INTEGRATING CABINETRY - CI 16 ONLY
Framed Panels
If the thickness of the custom panels is less than 1/4" (0.635 cm), they must be backed up with a sheet of shim material to build the total thickness to 1/4" (0.635 cm). If the panel is thicker than 1/4" (0.635 cm), an edge must be routed around the panel to ensure a proper fit.
IMPORTANT
If you are replacing the factory air vents with an overlay, DO NOT restrict the air flow. The air flow must be the same or greater than the factory air vents of 31 square inches (200 cm2).
The door handles must be installed before the screw covers are installed. If you fail to install the handles before the screw covers, you can damage the covers. The screw covers are taped to the unit doors during shipping. Use care when removing covers.
The door panel weight must not exceed 25 lb (11.3 kg).
Panels 1/4" (0.635 cm) thick or less | FRAMED PANEL SPECIFICATION |
Trim reveal 1/4" min.
1/4" Panel
Panels thicker than 1/4" (0.635 cm)
Trim reveal 1/4" min.
Rout to 1/4" thickness
Figure 4
28.4" (72.1 cm)
Refrigerator
Panel
Freezer
Panel
46.3" (117.6 cm)
28.9" (73.5 cm)
A delight in freshness
6 | C 16/CI 16 |
