Liebherr CS 1400 7082 663-00 Supercool - Figure, Setup Mode - Figure, Exit setup mode, ously

Models: CS 1400 7082 663-00

1 22
Download 22 pages 42.7 Kb
Page 10
Image 10
Supercool - Figure 5

Operation

Supercool - Figure 5

Touching the Supercool icon switches the refrigerator compartment to maximum cooling. It is recommended particularly if you wish to cool large quantities of food, drinks, freshly baked goods or meals rapidly.

Turning on: Touch the Supercool icon briefly so the LED Setup Mode - Figure 5 turns on. The refrigerator temperature will drop to its lowest value.

IMPORTANT

The Supercool function uses slightly more energy. After approximately six hours, however, the refrigerator switches back automatically to normal energy-saving operation. If required, the Supercooling function can be turned off sooner.

Turning off: Touch the Supercool icon again until the LED How to activate the setup mode: turns off.

Setup Mode - Figure 5

In the setup mode you can activate the following functions:

In the setup mode the display will flash continu- = Sabbath mode

ously. = Display brightness

Exit setup mode:Manual background = Temperature display mode Manual background = Child lock

How to activate the setup mode:

Touch the Superfrost icon for approximately five seconds

-the Superfrost LED Manual backgroundManual background turns on for 5 sec- onds

-after 5 seconds Manual background will flash in the display.

The appliance is in the setup mode now.

You can select the setup mode functions by touching the freezer compartment Up/Down icons.

Manual backgroundManual backgroundSupercool iconManual backgroundManual background

Supercool LED

Note

In the setup mode the display will flash continu-

ously.

Exit setup mode:

Touch the freezer compartment On/Off icon. The appliance will change back to normal operation.

Freezer compartment Up/Down icons

Superfrost icon

Figure 5

Freezer compartment On/Off icon

10

Page 10
Image 10
Liebherr CS 1400 7082 663-00 Supercool - Figure, Setup Mode - Figure, How to activate the setup mode, Exit setup mode