Troubleshooting

If a problem occurs during operation, check whether it is due to an operating error.

Please note that even during the warranty period, some repair costs may be your responsibility. You may be able to correct the following faults by checking the possible causes yourself:

Problem

Possible Cause and Remedy

 

 

Appliance does not work,

- Is the appliance turned on properly?.

display is off

- Is the power source plug properly inserted in the socket?.

 

- Is the circuit breaker or fuse in operating condition?

 

 

The interior light does

- Is the refrigerator compartment turned on?.

not come on

- Has the door been open for more than 15 minutes?.

 

 

Loud running noise

- Is the appliance standing firmly on the floor, or does the compressor.

 

cause nearby items of furniture or objects to vibrate? If necessary, move .

 

the appliance slightly, align by adjusting the adjustable feet, or move .

 

bottles and containers apart.

 

 

Motor seems to

- Is the ambient temperature too hot? See Safety Regulations.

run too long

- Has the appliance been opened too often or left open too long?.

 

- A large amount of food has been added..

 

- Unit is in Supercooling mode. Verify unit is in normal operation mode.

 

 

The temperature is

- Is the temperature setting correct? See Setting the Temperature.

not cold enough

- Has an excessive amount of fresh food been placed in the appliance?

 

- Does a separately installed thermometer show the correct reading?

 

- Is the ventilation system working properly?

 

- Is the appliance set up too close to a heat source?

Freezer temperature display shows two dashes ‘‘- -”.

The freezer temperature display will only show temperatures that are below freezing. When initially starting the freezer it will not be below freezing. It will take three to five hours (depending on ambient conditions) for freezing temperatures to be achieved and thus displayed numerically. This may also occur after a power failure.

18

Page 17 Page 19
Page 18
Image 18
Liebherr CS 1611 7801 149-00 manual Troubleshooting, Problem Possible Cause and Remedy
Page 17 Page 19

CS 1611 7801 149-00 specifications

The Liebherr CS 1611 7801 149-00 is a versatile and highly efficient construction site mixer known for its reliability and advanced technology. As part of Liebherr's extensive lineup, this model caters to the needs of modern construction projects, delivering superior mixing performance and user-centric features.

One of the standout features of the CS 1611 is its robust construction. This mixer is built with high-strength materials, ensuring durability even under the toughest working conditions. The reinforced design minimizes wear and tear, translating into lower maintenance costs and increased lifespan.

With a mixing capacity that is optimized for a variety of applications, the CS 1611 is suitable for both small-scale and large-scale projects. It can handle a wide range of materials, from concrete to aggregates, making it a versatile choice for contractors and construction firms.

In terms of technology, the Liebherr CS 1611 incorporates cutting-edge mixing mechanisms that ensure a homogenous blend. The mixer’s specially designed mixing arms and paddles allow for efficient material distribution, reducing the time needed to achieve the desired consistency. This technology not only enhances productivity but also ensures high-quality results.

The CS 1611 also boasts an intuitive control system, which allows operators to easily manage mixing speeds and cycles. This user-friendly interface is designed to enhance operational efficiency, making it accessible for operators of all skill levels. Additionally, the mixer is equipped with safety features that ensure secure operation, protecting both the operator and the machinery.

Mobility is another key characteristic of the Liebherr CS 1611. It features a compact design that enables easy transportation between job sites. The mixer can be easily mounted on various vehicle types, providing contractors with flexibility and convenience.

Energy efficiency is paramount in today’s construction industry, and the Liebherr CS 1611 responds to this demand. It is designed to minimize energy consumption while maintaining optimal performance levels. This aligns with current sustainability trends, as it helps reduce the environmental impact of construction activities.

In conclusion, the Liebherr CS 1611 7801 149-00 mixer stands out for its robust construction, advanced mixing technology, user-friendly controls, and energy efficiency. These features combined make it an essential tool for a wide range of construction projects, meeting the evolving demands of the industry while ensuring high-quality performance and reliability.
Top Page Image Contents