Liebherr F1051 Controls and displays, Start-up, Operating and control elements, Risk of crushing

Controls and displays

tive measures, e. g. use gloves. Do not consume ice cream (especially sherbets) and ice cubes immediately when they are too cold.

Risk of injury and damage:

-Hot steam may lead to injuries. Do not use any electrical heating or steam cleaning equip- ment, naked flames or defrosting sprays for defrosting

-Do not remove ice with sharp objects

Risk of crushing

-Do not reach into the soft stop mechanism. Fingers may be trapped when the door is closed.

Follow the specific instructions in the other sections:

DANGER	indicates a hazardous situation,
	which if not avoided, will result in
	death or serious injury.
WARNING	indicates a hazardous situation,
	which if not avoided, could result in
	death or serious injury.
CAUTION	indicates a hazardous situation,
	which if not avoided, will result in
	minor or moderate injury.
NOTICE	indicates a hazardous situation,
	which if not avoided, could result in
	damage to property.
Note	indicates useful advice and tips.

3 Controls and displays

3.1 Operating and control elements

Fig. 2		(8)	On/Off button
(1)	Up button
(2)	Down button	(9)	SuperFrost button
(3)	Menu symbol	(10)Alarm button

(4)Alarm symbol

(5)Filter symbol(12)Sabbath Mode symbol

(6)IceMaker symbol (13)Child safety symbol

(7)SuperFrost symbol (14)Temperature display(11)Power failure symbol

The exact contact point is between the symbol and its label

3.2 Temperature display

The following is displayed in normal operation: - the highest freezer temperature

The temperature display:is flashing:

-the temperature setting has been changed

-after switch-on the temperature is not yet cold enough

-the temperature has risen by several degrees

Dashes are shown on the display:

- the freezer temperature is above 32 °F (0 °C).

The following displays indicate malfunction. Possible causes and corrective actions: (see Troubleshooting).

-F0 through F9

-FE

-The power failure symbol flashes.

4Start-up

4.1Transporting the appliance

CAUTION

Risk of injury or damage if incorrectly transported. u Transport the appliance in its packaging.

u Transport the appliance upright.

u Do not move the appliance on your own.

4.2 Setting up the appliance

WARNING

Risk of fire due to moisture!

If live parts or the power cord get wet, this can cause a short circuit.

u The appliance is designed for use in enclosed spaces. Do not operate the appliance in open space or in damp areas or where there is spray.

u Only operate the appliance after it has been installed.

WARNING

Risk of fire due to short circuit.

If the power cable or plug of the appliance or another appliance and the back of the appliance touch each other the power cable or plug will be damaged by the vibrations of the appliance which could lead to a short circuit.

u Install the appliance so that it does not touch any plugs or power cables.

u Do not connect the appliance or other appliances to the sockets on the back of the appliance.

* Depending on model and options 5