Liebherr F1051, FI1051 manual Troubleshooting

Models: F1051 FI1051

1 18
Download 18 pages 17.06 Kb
Page 15
Image 15
Troubleshooting

 

 

 

Troubleshooting

 

 

 

 

 

 

Problem

Possible Cause

Correction

 

 

appliance are

 

 

 

 

 

hot*.

 

 

 

 

 

The IceMaker

The appliance and therefore the

u Connect the appliance (see Start-up).

 

cannot be

IceMaker are not connected.

 

 

 

 

switched on.

 

 

 

 

 

The IceMaker is

The IceMaker is not switched on.

u Switch the IceMaker on.

 

 

not making ice

The drawer of the IceMaker is not

u Close the drawer properly.

 

 

cubes.

properly closed.

 

 

 

 

 

The water connection is not open.

u Open the water connection.

 

 

 

The water supply to the IceMaker

u Check the connection to the water supply (see the

 

 

was interrupted.

 

Assembly Instructions, Connecting the Water

 

 

 

 

Supply).

(see the Assembly

 

 

 

u Check the pipes and hoses

 

 

 

 

Instructions, Connecting the Water Supply).

 

 

There is a blocked filter at the end of

u Clean the filters.

 

 

 

the water supply hose or at the

 

 

 

 

 

connecting part on the machine.

 

 

 

 

 

The waterline was not bled of all air

u

Please contact your qualified installation plumber to

 

 

during installation

 

ensure the above criteria is met before calling for

 

 

 

 

service.

 

 

The temperature

The door of the appliance is not

u Close the appliance door.

 

 

is not cold

closed properly.

 

 

 

 

enough.

Insufficient ventilation.

u Clear ventilation grilles.

 

 

 

The ambient temperature is too high.

u Solution: (see 1.3)

 

 

 

The appliance was opened too

u

Wait to see whether the required temperature resets

 

 

frequently or for too long.

 

itself by itself. If not, contact the customer service

 

 

 

 

department (see Maintenance).

 

 

Too much fresh food was placed

u Solution: (see 5.10)

 

 

 

inside without SuperFrost.

 

 

 

 

 

The temperature is incorrectly set.

u Set to a colder temperature and check after 24 hours

 

 

The appliance is too near to a heat

u Change location of appliance or the heat source.

 

 

source (stove, heater etc).

 

 

 

 

Display show

The display will only show tempera-

u

When initially starting the appliance it will not be

 

two dashes (“-

tures that are below freezing.

 

below freezing. It will take three to five hours

 

-”).

 

 

(depending on ambient conditions) for freezing

 

 

 

 

temperatures to be achieved and thus displayed

 

 

 

 

numerically.

 

 

 

The freezer temperature has risen

u

See also “Power failure” and “

 

 

above zero degrees due to a power

 

 

 

failure or power interruption.

 

 

 

 

The interior light

The appliance is not switched on.

u Switch on the appliance.

 

 

is not on.

The door was open for longer than

u

The interior light automatically switches itself off if

 

 

15 minutes.

 

the door has been open for about 15 minutes.

 

* Depending on model and options

15

 

Page 15
Image 15
Liebherr F1051, FI1051 manual Troubleshooting