Liebherr WFI1051, WF1051 manual To Clean the IceMaker, Figure J

Models: WF1051 WFI1051

1 19
Download 19 pages 39.99 Kb
Page 16
Image 16

ICEMAKER

To Clean the IceMaker

The IceMaker (arrow in Figure J) can be cleaned

by using this procedure.

1.Pull out the drawer and remove the ice.

2.Clean the drawer with warm water and mild dish detergent.

3.To access the IceMaker for cleaning:

a.With the drawer pulled out, press and hold the “ON/OFF” button until the LED goes out (takes about 1 second).

b.Continue to hold the button and after 10 seconds the LED will start to flash.

c.Insert the drawer while the LED is flashing The IceMaker should rotate down into the cleaning position.

d.Remove the drawer.

4.Clean the IceMaker with warm water. If you need to use a cleaning aid, use a mild dish detergent and rinse. You will need to throw out the first three batches of ice if you use any soap.

5.Push the “ON/OFF” button until the LED lights and insert the drawer.

6.Throw out the first three batches of ice to remove any soap residue.

Note

If you need to leave the IceMaker off, clean the IceMaker but do not push the “ON/OFF” button in Step 5.

Figure J

A delight in freshness

12

WF1051 / WFI 1051

Page 16
Image 16
Liebherr WFI1051, WF1051 manual To Clean the IceMaker, Figure J