TROUBLESHOOTING
Your appliance is designed and manufactured for a long life span and reliable operation.
If a malfunction nonetheless occurs during operation, check whether it is due to an operating error. Please note that even during the warranty period the resultant servicing costs in this case will have to be borne by the owner.
You may be able to rectify the following faults by checking the possible causes yourself:
Malfunction | Possible cause and remedy |
|
|
Appliance does not work, display is off
-Is the appliance switched on properly?
-Is the power cord properly inserted in the socket?
-Is the circuit breaker or fuse in operating condition?
The interior light does not come on
-Is the winecooler compartment turned ON?
-Has the door been open for more than 15 minutes?
-The bulb is defective. Change the bulb as described in Interior light.
Loud running noise
-Is the appliance standing fi rmly on the fl oor, or does the compressor cause nearby items of furniture or objects to vibrate? If necessary, move the appliance slightly, align by adjusting the adjustable feet, or move bottles and containers apart.
-Burbling noises are normal. These are caused by the refrigerant fl owing round the refrigerant circuit.
A short clicking sound: This will be heard whenever the refrigeration unit (the motor) switches on or off automatically.
Motor noise: This will be slightly louder for a brief period when the refrigeration unit switches on. The refrigerating capacity will increase when the SuperFrost function is activated, fresh food has just been placed in the appliance or the door has been left open for a while.
The audible warning signal sounds, the temperature is not cold enough
-Have you put too much fresh food into the freezer without activating SuperFrost? (See "SuperFrost")
-Does the door close properly?
-Is the appliance suffi ciently well ventilated? Clear ventilation grilles if necessary.
-Is the ambient temperature too hot? (See "Safety regulations")
-Has the appliance been opened too often or left open too long?
-If applicable, wait until the appliance reaches the required temperature itself.
-Please note that, as can happen with other forms of storage, slight mould may form depending on the type of adhesive on the labels. This can be rectifi ed by carefully cleaning any adhesive residues off the bottles.
appears in the display
- There has been a power failure; proceed as described in "Power failure/FrostControl display".
The outside of the appliance may feel warm in places
- That is quite normal. The heat from the cooling circuit is used to avoid the formation of condensate.
A delight in freshness
WF 1051 / WFI 1051 | 13 |
