Liebherr WS14300 manual Wine Cooler Compartment, Interior Lighting Figures 19, Labels

WINE COOLER COMPARTMENT

Interior Lighting - Figures 19 - 20

•The interior light emits class 1M laser radiation. DO NOT look directly at light or through any optical instruments when the light defuser is removed. Severe eye injury can occur.

•The interior light may only be replaced by the customer service technician or by competent skilled personnel!

Lightbars are integrated into each compartment.

Figure 19

The interior lights can be turned on and off using the Light button, and the brightness of the lighting can be adjusted.

This function applies to the lighting of all three compartments and is integrated in the upper control only.

•Press the Light button. The indicator lamp in the switch will light.

•Then press and hold the Light button and at the same time press the temperature setting but- tons for the lower compartment to increase or decrease the brightness.

 “DOWN“ = darker,  “UP“ = brighter.

Figure 20

Additional Features

Pull-out Racks - Figure 21

The pull-out racks allows bottles of wine to be viewed and removed more easily. The control ele- ment panel shelf cannot be removed.

Labels

The appliance is supplied with a label holder with labels for each rack. Use these to label the type of wine stored on each shelf. Use a soft pencil on the labels so that you can erase it again when necessary. Additional labels can be obtained from your Liebherr Dealer or Distributor.

Fitting: Click the label holder into place and slide the label in from the side.

Figure 21

13