Liebherr WS14300 manual Additional Functions Figures 14, = changing the temperature display

OPERATION

Additional Functions - Figures 14 - 18

In setup mode you can set the Childproof Lock, adjust the brightness of the display and choose the unit of temperature for the display in degrees Fahrenheit or degrees Celsius. The childproof lock is designed to protect the appliance from being switched off accidentally by children.

Activating set-up mode at upper control unit - Figure 14

Figure 14

Activating set-up mode at lower control unit - Figure 15

Figure 15

Activating set-up mode:

•Press the ventilation button for approximately five seconds - the Ventilation button flashes - the dis- play shows C for childproof lock.

Note: the value to be altered flashes.

•Select the required function by pressing the /(UP/DOWN) button:

C = Childproof Lock, = brightness or

= changing the temperature display.

•Now select ON or OFF by pressing the ventilation button briefly:

For C = childproof lock, press the /(UP/ DOWN) button to select

C 1 = childproof lock on or

C 0 = childproof lock off and acknowledge with the Ventilation button.

When the symbol is lit, the childproof lock is activated.

Figure 16

For = brightness, press /(UP/DOWN) button to select

1 = minimum to

5 = maximum brightness and acknowledge with Ventilation button.

Figure 17

For = unit of temperature, press / (UP/ DOWN) button to select °C= to display degrees Celsius, °F = to display degrees Fahrenheit for temperature display and acknowledge with Ventilation button.

Figure 18

Exit set-up mode:

•Exit the set-up mode by pressing the ON/OFF button; after two minutes the electronic system switches over automatically. The normal operating mode is activated again.

12