Wine cooler compartment, Interior light, Labels

Wine cooler compartment

The interior of the appliance is lit by an LED light strip at the top of each compartment.

The interior light will always switch on when the appliance door is opened.

The interior light will go out approx. 5 seconds after the door is closed.

Press the Light button if you want the interior light to be on even when the door is closed.

Note This function applies to the lighting of all three compart- ments.

Furthermore, the brightness of the lighting can be adjusted.

• Press the Light button.

• Press and hold the Light button and at the same time press the temperature setting buttons to increase or decrease the brightness.

Note: The brightness will change in all compartments.

The way in which wines con- tinue to mature depends on the ambient conditions. The quality of the air is therefore decisive for preserving the wine.

We recommend that you replace the illustrated filter once a year. Filters can be obtained from your dealer.

Changing the filter:

Take the filter by the handle. Turn it 90° to the left or right and remove.

Inserting the filter:

Insert with the handle in a vertical position. Turn it 90° to the left or right until it clicks into place.

The appliance is supplied with one label for each wooden shelf.

Use these to label the type of wine stored on each shelf.

Additional labels can be obtained from your dealer.

WARNING!

The light intensity of the LED light corresponds to laser class 1/1M.

The light cover may only be removed by customer service staff.

If the cover is removed, do not look directly at the light through optical lenses from close distance. This can damage your eyes.

Click the label holder into place and slide the label in from the side.