Reversing the door hinges
WARNING!
Do not move the front section of the soft stop mechanism in the direction indicated when the safety bracket has been removed.
The hinge may be closed suddenly by the strong integrated spring mechanism. This can cause serious hand or finger injuries.
11. Remove screw.
12.Pivot soft stop mechanism outwards on the right,
pull to the right and remove.
13.Slide spacer to the left and remove.
1211 13
7. | Remove red safety bracket. | 7 |
|
8
14. Rotate spacer 14 180° and
the opposite side.
15.Rotate soft stop
mechanism 180° and
16.Remove red safety bracket.
Refer to warning in point 7.
15
16
| Note for fitting bottom door cover |
8. Compress the cover in center and release. | An arrow is visible on the inside of the |
Remove cover. | cover near its centre. |
| |
| This must point upwards when fitted. |
9
9.Transfer plate to other side of cover.
| 10. Slide red safety bracket over |
10 | the hinge. |
|
18 17
17.Position cover and screw into place.
18.Slide red safety bracket over the hinge.
17