Setting the temperature
The temperature of all compartments can be set sepa- rately.
Use the Zone button to select the compartment whose temperature you wish to adjust.
The 
symbol indicates which compartment is active.
Reducing the temperature
Press the Down button.
Increasing the temperature
Press the Up button.
-When pressing one of the buttons for the first time, the display will start to flash.
-Pressing this button again enables you to change the temperature setting.
-The electronic control system will switch over auto- matically about 5 seconds after the last time you pressed the button, and the actual temperature will be displayed.
The temperature can be set at between 41°F and 68°F.
The following drinking temperatures are recommended for the various types of wine.
Red wines 57°F to 68°F (14°C to 20°C) Rosé wines 50°F to 54°F (10°C to 12°C) White wines 46°F to 54°F (8°C to 12°C)
Sparkling wines 44°F to 48°F (7°C to 9°C) Champagne 41°F to 44°F (5°C to 7°C)
If you are storing wine for long periods of time, it should be stored at a temperature of between 50°F and 54°F.
Fan
The interior fan ensures a constant and even interior temperature and a suitable climate for wine storage.
The humidity in the appliance can be increased even further by activating the Ventilation button. This has a particularly positive effect for
The increased level of humidity prevents the corks from drying out.
Note
If the appliance is operated in a low ambient tempera- ture, the fan may also run even when the fan function is deactivated.
Operation
Door open alarm
If the door is left open for more than 180 seconds, the audible warning signal will sound.
If the door must be opened for a lengthy period to place items into the appliance, cancel the audible warning signal by pressing the Alarm button.
The alarm switches back to standby when the door is shut.
Temperature alarm
If the temperatures in the interior are out of the permit- ted range, the audible warning signal will sound and the temperature display will flash.
After a lengthy power failure, the temperature in the interior may have risen to too high a level. After the power supply returns, the fall in temperature can be watched on the display.
•Cancel the audible warning signal by pressing the Alarm button.
The temperature display will stop flashing as soon as the temperature in the interior has reached the set value.
Temperature alarm after a fault in the appliance
If the appliance develops a fault, the temperature in the interior may rise too high or fall too low. The audible warning signal will sound and the temperature display will flash.
If the temperature displayed is too high (warm), first check whether the door is closed correctly.
If the temperature display continues to show a value that is too high or too low after one hour, contact the customer service department.
•Cancel the audible warning signal by pressing the Alarm button.
If F1, F3, F8, S1, S2, S3, S7, S8 or S9 appears in the display, the appliance has suffered a fault. In this case, contact the customer service department.
9
