Operation
Operating and control elements
The electronic control panel uses touch capacitance technology. Any function can be activated by touching the corresponding icon.
The exact contact point is between the symbol and its label
1On/Off button (switching the appliance on and off)
2Fan switch
3Interior light On/Off button
4Display
5Button to activate a compartment to adjust its temperature
6Temperature setting buttons
7Audible warning On/Off button
Symbols in the display
Alarm (symbol flashes if the temperature inside the appliance is too high or too low)
Demo mode is activated
Sabbath mode is activated
Setup mode is activated (activating the child lock and adjusting the display brightness)
The interior fan runs constantly Child lock is activated
The interior light is switched on constantly
Temperature display
Upper compartment temperature display
Middle compartment temperature display Lower compartment temperature display
These symbols indicate which compartment is active so that its temperature can be adjusted.
Demo mode
Demo mode can be activated for presenting the appli- ance at exhibitions or in salesrooms as though in nor- mal operating mode. DEMO appears in the display.
When in this mode, the cooling circuit is switched off!
If this mode is activated by accident, it can be deacti- vated as detailed below.
Press | + | for 5 seconds. |
Display = |
|
|
Display =
The refrigeration unit switches on. The tem- perature display flashes.
The appliance is now in normal operating mode.
Switching the appliance on and off
Switching the appliance on
Press the On/Off button until the temperature display lights up.
Switching the appliance off
Keep the On/Off button pressed for approx. 3 seconds so that the temperature display goes out.
8