![](/images/new-backgrounds/1298041/29804115x1.webp)
| FIGURE 8 | |
| TOP BOOM | |
| 3/8” THREADED ROD | |
| 3/8” WASHER | |
3/8 X 1/2” SPACER | 3/8” HEX NUT | |
2”PULLEY | ||
| ||
| 3/8” LOCK NUT |
STEP 8
•Remove two 2” PULLEYS to the rear bracket on the TOP BOOM using one 3/8” THREADED SHAFT, two 3/8” WASHERS, two 3/8” HEX NUTS, and two 3/8” LOCK NUTS as shown in FIGURE 8.
•Discard the two 3/8 X 1/2” SPACERS.
|
| FIGURE 9 |
|
| TOP BOOM |
| 3/8” THREADED ROD | |
ELASTIC |
| 3/8” HEX NUT |
| 3/8” WASHER | |
CORD |
| |
| 2”PULLEY | |
| 3/8” LOCK NUT | |
|
|
STEP 9
•SECURELY assemble the two previously removed 2” PULLEYS, one previously removed 3/8” THREADED SHAFT, one previously removed
•Position the elastic cords over the 2” PULLEYS as shown in FIGURE 9.
8