Life Fitness 701 manual Shroudfasteners

701 FACTOR525 PEC DEC ATT. ASSEMBLYINSTRUCTIONS(LEVEL 2)

The D-lUNGCABLECLIP on the end of the LINKCABLEshouid restljust above the D-RING.If the LINKCABLEseems to be pulling on the D-RINGor is resting too far above the D-RING,adjust it by raising or lowering the two (2) 1/4-2~ IN. NUTSthat attaches the LINKCABLEto the PULLEY BRACKETWhen.the correct height is obtained SECURELYtightea the two (2) 1/4-28 NUTStogether around the PULLEYBRACKET.

9.To adjust the pre-streteh on the PECDECARMS:

¯Pull up on the COTTERLESSHITCHPIN. Swivel the ARMforward or backward.

Let the PIN drop downinto one of the two holes in the PECARMADVANCES.

¯Or let the PIN drop behind the PEC ARMADVANCES.

NOTE:

I0.

IF ASSEMBLING THE LEG PRESS ATTACHMENTNEXT, STOP HERE AND REFER TO THOSE ASSEMBLY INSTRUCTIONS. IF ONLY ASSEMBLING TIIE PEC DEC ATTACHMENT TO BASE UNIT, .CONTINUE ON WITH THESE ASSEMBLYINSTRUCTIONS.

Wrap the SHROUDaround the C/',BLES that route to the D-RING,and assemble the SHROUDto BOTHSIDESof'the/VIIDDLE U, PRIGHTas shown in (VIEWF-F) on drawing, using the fourteen (I-t)

SHROUDFASTENERS. "

THIS CONCLUDESTHE ASSE~,IBLY OF (LEVEL 2), AND THE ASSEMBLY OF THE PEC DEC ATTACHMENT FOR

THE FACTOR525 BASE UNIT.