Life Fitness 8205 FIGURE 17, Repeat STEP 17 to assemble SHROUD on other side of the CABLE CROSS OVER.

1 18

FIGURE 17

• SECURELY assemble the SHROUD (11) to the TOWER (1) using four 3/8 X 1” BUTTON HEAD CAP SCREWS (31) as shown in FIGURE 17.

0 1 2 3 4 5 6

1/2 1/2 1/2 1/2 1/2 1/2

• Repeat STEP 17 to assemble SHROUD on other side of the CABLE CROSS OVER.

MAKE SURE

CABLE IS

ROUTED

BEHIND

SHROUD!

3/8 X 1” 31

BUTTON

HEAD

Contents

Main IMPORTANT NOTES Tools Required for Assembly PARTS LIST Bolt Length Ruler BOLT LENGTH NOTE: Bolt length is measured from the underside of the head of the bolt. BOLT LENGTH RULER: 01 2 3 4 5 6 FIGURE 1 01 2 3 4 5 6 FIGURE 2 FIGURE 3 Page Page 01 2 3 4 5 6 FIGURE 6 FIGURE 7 FIGURE 8 STEP 8: STEP 7: FIGURE 9 STEP 9: FIGURE 10 STEP 10: FIGURE 11 STEP 11: FIGURE 12 FIGURE 13 STEP 13: FIGURE 15 STEP 14: FIGURE 14 STEP 15: Repeat STEPS 6-16 to assemble cable on other side of the CABLE CROSS OVER. FIGURE 17 STEP 17: Repeat STEP 17 to assemble SHROUD on other side of the CABLE CROSS OVER.