Life Fitness CL5X manual

1.Before proceeding, familiarize yourself with the parts of the Cross-Trainer and make sure that you have received all the items described in the Parts List.

2.Locate the left and right FRONT COVER (#9, #10). Using two PHILLIPS PAN HEAD SCREWS (#3), mount the USER LEFT FRONT COVER (#9) to the FRAME (A). Attach the USER RIGHT FRONT COVER (#10) to the FRAME in the same manner using two PHILLIPS PAN HEAD SCREWS (#3). Secure the tops of the FRONT COVERS together using two PHILLIPS PAN HEAD SCREWS (#3).

CAUTION: Do not overtighten the PHILLIPS PAN HEAD SCREWS (#3).

3.Locate the RIGHT USER ARM (#12). Snap the 2-PIN CONNECTOR (2PA) located at the bottom of the RIGHT USER ARM into the 2-PIN CONNECTOR (2PB) positioned at the top of the RIGHT ROCKER ARM (B). Feed the con- nectors and excess cable up into the RIGHT USER ARM. Secure the RIGHT USER ARM to the RIGHT ROCKER ARM using three HEX SOCKET HEAD CAP SCREWS (#1) and INTERNAL TOOTH LOCK WASHERS (#18). Repeat the procedure for the LEFT USER ARM (#11) and LEFT rocker arm (C). Tighten all screws securely.

CAUTION: Be careful not to pinch the WIRE HARNESSES when assembling the USER ARMS (#11 & #12) to the ROCKER ARMS (B & C).

4.Detach and unwrap the WIRE HARNESS (E) (16P, 4P) located at the top of the MONOCOLUMN (F). Holding the CONSOLE SUPPORT ASSEMBLY (#7) with the handgrips facing upward, feed the WIRE HARNESS up through the neck and out the top access hole. Carefully lower the CONSOLE SUPPORT ASSEMBLY into the MONOCOL- UMN.

CAUTION: Be careful not to pinch the WIRE HARNESSES

(E) when assembling the CONSOLE SUPPORT ASSEM- BLY (#7) to the MONOCOLUMN (F).

5.Using two HEX SOCKET HEAD CAP SCREWS (#1) and two FLAT WASHERS (#8), secure the CONSOLE SUP- PORT ASSEMBLY (#7) to the MONOCOLUMN (F). Tighten the SCREWS securely.

6.Locate the ACCESSORY TRAY (#17). Align the ACCES- SORY TRAY with the bottom of the DISPLAY CONSOLE (#4) as shown. Using four MOUNTING SCREWS (#2), secure the ACCESSORY TRAY to the DISPLAY CON- SOLE as shown. Tighten the SCREWS securely.

CAUTION: Do not overtighten the MOUNTING SCREWS (#2).

6