Life Fitness CM3 manual Step

FIGURE 9

STEP 9:

A.Detach Short Cable from both Rear Guide Cables (74) as shown in Figure 9 (B).

B.Slide Long Cables of Rear Guide Cables (74) through eyelets of Guide Bracket (42) as shown in Figure 9 (B). Reattach Short Cable of Rear Guide Cables (74) to Long Cable, leaving Guide Bracket (42) loose.

D.Assemble two Boom Pulley Plates (13) and two 3-1/2" Pulleys (37) to the Boom Plates (14 & 15) using two 3/8 x 3-3/4" Bolts (57) and two 3/8" Lock Nuts (63). See Figure 9.

E.Loosely assemble one 4-1/2" Pulley (38), one 4-1/2" Cable Guard (35) and one 1" Spacer (51) to the Boom Plates (14 & 15), using one 3/8 x 3-3/4" Bolt (57) and one 3/8" Lock Nut (63).

F.Loosely assemble one 3-1/2" Pulley (37), one 3-1/2" Cable Guard (34), one 1" Spacer (51) and both Rear Guide Cables (74) to the Boom Plates (14 & 15), using one 3/8 x 4-1/4" Bolt (68) and one 3/8" Lock Nut (63).

NOTE: Guide Bracket (42) will remain loose until attached to pulley assembly in later step.

17