1/2 X 104mm 58
3
46
43
8
162
47
SPRING PIN
FIGURE 8
STEP 8:
A.Securely assemble the Three Prong Knob (43) to the Front Base (1) as shown.
B.Insert the Seat Adjust Assembly (7) into the Front Base (1) as shown. The seat height can be adjusted using the Spring Pin and can be secured with the Three Prong Knob (43).
C.Assemble the Leg Pedestal (8) to the Front Base (1) using two RH caps (47), one 1/2 x 104mm Bolt (58), two 1/2" Washers (46) and one 1/2" Low Height Lock Nut (62).
Note: Tighten this connection enough to prevent excess play yet allow the Leg Pedestal to rotate freely.
16
