Life Fitness CM3 manual Step

IMPORTANT!

UNCOIL AND STRAIGHTEN ALL CABLES TO REMOVE ALL TWISTS BEFORE

INSTALLING.

STEP 10:

A. Assemble the Weight Stack Pin (27) to the

Head Plate Assembly (23) as shown in

Figure 10.

B. Screw the long threaded end of the Weight

Stack Cable (29) into the end of the Head

Plate Assembly (23). See Figure 10.

C.Route the Weight Stack Cable (29) around the pulleys in the Boom Plates (14 & 15) as shown in Figure 10.

Note: Make sure the cable runs in the grooves of the pulleys.

D.Tighten the two 3/8 x 3-3/4" Bolts (57) hold- ing the 3-1/2" Cable Guard (34) and the 4- 1/2" Cable Guard (35)

Note: Make sure the guards are oriented correctly.

E.Assemble two Pulley Plates (10) around one 3-1/2" Pulley (37), using one 3/8 x

1-3/4" Bolt (53) and one 3/8" Lock Nut (63) as shown in Figure 10.

FIGURE 10

18