11
12
50
44
44
49
1
11
44
50
STEP 2:
Use the following hardware contained in Blister Pack (7-1):
M10 x 70mm SCREW (Qty. 4)
M10 WASHER (Qty. 8)
M10 HEX NYLOCK NUT(Qty. 4)
Attach the CHIN UP BAR (12) between the LEFT TOWER (1) and RIGHTTOWER (11) using four M10 x 70mm
SCREWS (50), eight M10 WASHERS(44), and four M10 HEX NYLOCK NUTS (49). Finger tighten only.
NOTE: Make sure the CHIN UP BAR (12)is in the correct position as shown.
Tighten all FRAME and CHINUP BAR screws and nuts securely.