15
STEP 6:
Uncoil the cables to remove all twists.
Remove the (UPPER) PULLEYS (13) on the RIGHT TOWER(11) and LEFTTOWER (1) by removing the M10 x
50mm SCREW (52), PULLEY RETAINER (53), M10 SOCKETHEAD NUT (51), and PARTIALPULLEY COVERS
(14). Set the (UPPER) PULLEYS (13)and hardware aside.
Remove the (LOWER) PULLEYS (13) on the RIGHTTOWER (11) and LEFT TOWER (1) by removing the M10 x
45mm SCREW (48), two M10 WASHERS (44), and M10 HEX NYLOCK NUT (49).
48 44
44 49
13
LowerPulley
14 53 52
51 14 13
UpperPulley