INSTALLATION

9.

Tilt the DISPLAY CONSOLE (--) forward and connect

A

 

 

 

 

the I-R CONTROL (A) and S-VIDEO (--) CABLES to

A

A

 

the back of the DISPLAY CONSOLE.

 

 

A

10.

Tape the ends of the all CABLES (POWER,

A

 

 

COAXIAL, I-R CONTROL, S-VIDEO) together.

 

11.

 

 

Feed the taped end of the MEDIA CABLES (--)

 

A

 

 

 

through the large hole in the back of the CONSOLE BRACKET (--). Carefully pull excess MEDIA CABLE through the CONSOLE BRACKET .

12.Slide one GROMMET (--) over the taped end of the MEDIA CABLES (--).

13.Holding the MAIN BRACKET ASSEMBLY (--) close to the CONSOLE BRIDGE (--) as shown. With the holes facing

upward, feed the taped end of the MEDIA CABLES (--)

A

 

through the BOTTOM LARGE HOLE of the MAIN BRACK-

A

ET ASSEMBLY and out of the UPPER HOLE as shown.

 

Carefully pull excess MEDIA CABLE through the MAIN

 

BRACKET ASSEMBLY.

 

14.Slide the remaining GROMMET (--) over the taped end of the MEDIA CABLES (--). Install the GROMMETS into the ACCESS HOLES.

15.Secure the MAIN BRACKET ASSEMBLY using four SCREWS (--) and WASHERS (--) as shown. Tighten the SCREWS securely. (8-10 ft. lbs.)

16.Install the MAIN BRACKET CAPS (--) to the top and bottom of the MAIN BRACKET ASSEMBLY (--).

17.

With the remaining TV BRACKET (--) oriented as shown, install it to the back of the

 

16

 

 

 

TV (--) using four SCREWS (--) and WASHERS (--). Tighten the SCREWS

 

 

 

securely. (8-10 ft. lbs.)

 

 

15

 

NOTE: Be sure the side holes of the TV BRACKET are oriented as

 

 

 

 

shown.

6

 

 

18.

Position the TV BRACKETS (-- & --) together as shown below and

17

 

 

 

 

 

 

secure them together using one BOLT (--), WASHER (--) and NUT (--).

 

 

 

 

Leave the BOLT and NUT loose at this time.

 

 

 

 

NOTE: Be sure the PIVOT POST of the TV BRACKET (--) engages onto

 

 

 

TV BRACKET (--).

 

 

 

19.

Remove the tape from the end of the MEDIA CABLES (POWER,

 

 

A

 

COAXIAL, I-R CONTROL, S-VIDEO). Connect all cables to their corre-

 

 

 

 

 

sponding jacks located on the back of the TV (--) (See end of instruction man-

 

A A A

 

ual for TV connection details). Feed any excess MEDIA CABLE into the MAIN

 

 

 

BRACKET (--).

 

 

 

20.

Tilt the DOSPLAY CONSOLE back into place. Replace the REAR CONSOLE

 

 

 

COVER (--) and secure it using the previously removed six SCREWS (--).

A

A

 

Tighten the SCREWS securely. (8-10 ft. lbs.). Do not over-tighten the

 

 

A

 

SCREWS.

 

 

 

21.

Align the LOWEST SIDE HOLES on the TV BRACKETS (-- & --).

8

 

 

 

Secure the TV BRACKET into proper position using one SCREW (--

 

 

 

 

 

 

 

) on each side.

 

 

16

 

NOTE: Life Fitness recommends aligning and securing the TV

 

 

 

 

 

 

 

at the lowest side holes ???? (--) as shown.

 

 

 

 

D 22

 

 

22. Plug in and power on the TV. Refer to the Owners

 

 

 

 

Manual for proper TV setup.

4

 

 

12

Page 13 Page 15
Page 14
Image 14
Life Fitness LCD Entertainment Ready installation instructions Bracket Assembly
Page 13 Page 15

LCD Entertainment Ready specifications

Life Fitness LCD Entertainment Ready is an innovative solution designed to enhance the workout experience while providing an outlet for entertainment and motivation. This state-of-the-art display technology is integrated into a wide range of Life Fitness cardio equipment, allowing users to stay engaged during their exercise routines. The LCD screens offer a vivid display that provides easy access to entertainment options, workout stats, and various fitness programs.

One of the standout features of Life Fitness LCD Entertainment Ready is its versatility. The screens are compatible with various entertainment platforms, enabling users to connect their personal devices to stream their favorite shows, movies, or music. This feature not only helps to make workouts more enjoyable but also encourages longer duration exercise sessions as individuals become immersed in their content.

In terms of technology, the Life Fitness LCD systems are equipped with high-definition screens that provide clear and concise visuals. The user interface is intuitive, allowing for easy navigation of multiple options, whether it’s tuning into a TV show or monitoring workout progress. Additionally, the screens are often touch-sensitive, providing a seamless interaction experience for users.

Another key characteristic of this entertainment system is its focus on user engagement. The interface not only provides entertainment but also promotes fitness goals through real-time feedback. Users can track calories burned, distance traveled, and heart rate. This information helps in maintaining motivation and allows individuals to adjust their workouts for optimal performance.

Moreover, Life Fitness prioritizes practicality and ease of installation. The LCD Entertainment Ready feature is designed to be integrated easily into the Life Fitness equipment lineup. Whether it's treadmills, stationary bikes, or ellipticals, this feature enhances the existing functionalities of the machines without compromising space or usability.

In conclusion, the Life Fitness LCD Entertainment Ready system exemplifies the merging of fitness and technology, creating an engaging workout environment. With its high-definition displays, entertainment compatibility, and user-friendly interface, it transforms routine exercise into a more enjoyable and motivating experience. This innovation showcases Life Fitness’s commitment to enhancing health and well-being through advanced technology and user-centric design.
Top Page Image Contents