INSTALLATION

MODELS 95CI, 93C, 90C UPRIGHT LIFECYCLE® EXERCISE BIKES

TOOLS REQUIRED: Metric Hex Key Set, Side Cutters

NOTE: Proceed with the following steps before attaching the DISPLAY CONSOLE and ACCESSORY TRAY as described in the Assembly Instructions.

1.Locate the SPACER (a). With the SPACER oriented as shown,

feed all the CONSOLE CONNECTORS, POWER CORD, and COAXIAL CABLE through the large center hole in the SPACER.

Slide the SPACER onto the CONSOLE MOUNTING PLATE () making sure the top of the SPACER hooks over the top of the CONSOLE MOUNTING PLATE. Align the mounting holes of

the SPACER and CONSOLE MOUNTING PLATE. Run the

POWER CORD, and COAXIAL CABLE through the channel at the top of the SPACER.

2. Locate the MOUNTING BRACKET (b). With the MOUNTING

BRACKET oriented as shown, feed all the CONSOLE CONNEC- TORS through the large center hole in the MOUNTING BRACKET. Align

the LOCATING TABS (c) of the MOUNTING BRACKET with the tab slots and position the MOUNTING BRACKET into the center channel of the SPACER. Slide the MOUNTING BRACKET upward until it locks solidly in the SPAC- ER. Secure the MOUNTING BRACKET to the SPACER using two FLAT HEAD SCREWS (d). Tighten the SCREWS securely.

3.Locate the REMOTE CONTROL (e). Remove the two HORIZONTAL CABLE TIES (C-H) for a VERTICAL (C-V) installation.

4.Remove the four SCREWS (2) securing the TOP POLAR COVER (5) to the BOTTOM POLAR COVER (6) and remove the TOP POLAR COVER. Carefully pull the lead end of each CABLE TIE (C-V) until the receptor end meets the bottom of the REMOTE CONTROL (e).

5.Locate the provided new TOP POLAR COVER (f) with mount-

ing slots. Feed both lead ends of the CABLE TIES (C-V) throught the bottom mounting slots of the TOP POLAR COVER as shown. Loop the lead ends of the CABLE TIES upward through the top mounting slots. Feed the CABLE TIES through until the bottom of the REMOTE CONTROL (e) contacts the TOP POLAR COVER.

6. Feed the lead ends of the CABLE TIES (C-V) through the recep- tor ends and slowly pull them tight, alternating between the two CABLE TIES. The remote control should now be snug against the TOP POLAR COVER (f). Trim the excess length of CABLE TIES.

7. Install the new TOP POLAR COVER (f) to the BOTTOM POLAR COVER (5) using the four previously removed SCREWS (2).

8.Loop the REMOTE CABLE (g) under the HANDLEBARS (11) and secure it to the top of the CONSOLE EXTENSION TUBE (h) using one CABLE TIE (j) at the location shown.

9.Install the DISPLAY CONSOLE (4) and ACCESSORY TRAY (3) as instructed in the

Assembly Instructions using the four new 1-1/2" SCREWS () supplied. Tighten the

SCREWS to 6-8 in-lbs. Do not overtighten the SCREWS.

CAUTION: Do not pinch any wires when assembling the DISPLAY CONSOLE (4) to the

CONSOLE MOUNTING PLATE (D).

16

Page 17 Page 19
Page 18
Image 18
Life Fitness LCD Entertainment Ready installation instructions Console Mounting Plate D
Page 17 Page 19

LCD Entertainment Ready specifications

Life Fitness LCD Entertainment Ready is an innovative solution designed to enhance the workout experience while providing an outlet for entertainment and motivation. This state-of-the-art display technology is integrated into a wide range of Life Fitness cardio equipment, allowing users to stay engaged during their exercise routines. The LCD screens offer a vivid display that provides easy access to entertainment options, workout stats, and various fitness programs.

One of the standout features of Life Fitness LCD Entertainment Ready is its versatility. The screens are compatible with various entertainment platforms, enabling users to connect their personal devices to stream their favorite shows, movies, or music. This feature not only helps to make workouts more enjoyable but also encourages longer duration exercise sessions as individuals become immersed in their content.

In terms of technology, the Life Fitness LCD systems are equipped with high-definition screens that provide clear and concise visuals. The user interface is intuitive, allowing for easy navigation of multiple options, whether it’s tuning into a TV show or monitoring workout progress. Additionally, the screens are often touch-sensitive, providing a seamless interaction experience for users.

Another key characteristic of this entertainment system is its focus on user engagement. The interface not only provides entertainment but also promotes fitness goals through real-time feedback. Users can track calories burned, distance traveled, and heart rate. This information helps in maintaining motivation and allows individuals to adjust their workouts for optimal performance.

Moreover, Life Fitness prioritizes practicality and ease of installation. The LCD Entertainment Ready feature is designed to be integrated easily into the Life Fitness equipment lineup. Whether it's treadmills, stationary bikes, or ellipticals, this feature enhances the existing functionalities of the machines without compromising space or usability.

In conclusion, the Life Fitness LCD Entertainment Ready system exemplifies the merging of fitness and technology, creating an engaging workout environment. With its high-definition displays, entertainment compatibility, and user-friendly interface, it transforms routine exercise into a more enjoyable and motivating experience. This innovation showcases Life Fitness’s commitment to enhancing health and well-being through advanced technology and user-centric design.
Top Page Image Contents