
Life Fitness Rear Drive
How To... Install AVK Leg Leveler Retainer
Bulletin
Tools Required: Screwdriver, Open end wrench | Service Kit |
1.Raise and support the front end of the
2.Remove the LEG LEVELERS.
3.Carefully remove the existing AVKs (nut inserts).
NOTE: Do not leave loose AVKs in the frame tube.
4.Install the new LEG LEVELER RETAINER with the radius cut facing up and outward as shown.
5.Align the bolt hole in the LEG LEVELER RETAINER with the bolt hole in the FRAME TUBE.
6.With the JAM NUT in place, screw the LEG LEVELER into the LEG LEVELER RETAINER.
7.Remove the support from the front end of the unit.
8.Stabilize the front of the unit and secure THE LEG LEVELER positions by tightening THE LEG LEVELER JAM NUTS against the FRAME TUBE.
Frame |
|
End |
|
Cap |
|
Leg Leveler | Radius cut faces |
up and outward | |
Retainer | towards end cap |
9.Reinstall the END CAPS.
Leg Leveler | Jam Nut |
|