10
Tools Required:
l(2) 9/16” Wrenches (either open/closed head or ratchet)
lPhillips Screwdriver
l13MM Socket 3/8” Drive
l3” Extension 3/8” Drive
l3/8” Drive Ratchet
# Part Description qty.
1 Left Upright 1
2 Right Upright 1
3 3/8 x 5” Hex Head Bolt 8
4 3/8” Flat Washer 8
5 3/8” Nut 8
6 Ergo™ Front Crossbar 1
7 M8 x 25MM Hex Head Bolt 8
8 M8 Washer 12
9 M8 Lock Nut 8
10 Tie Wrap 2
11 Plastic Grommet 2
12 Upper Dashboard Tray 1
13 M4.2 x19MM Phillips Head Screw 14
14 Display Console (shipped separately) 1
15 M5 x 25MM Phillips Head Screw 4
16 Lower Dashboard Tray 1
17 #10 x 0.5” Phillips Head Screw (silver) 2
18 End Cap Front 2
19 End Cap Rear 2
20 Bridge 1
21 Ergobar Backing Plate 2
22 #10 x 0.5” Phillips Head Screw (black) 2
4COmPONeNT LIST, HARDWARe, & ASSemBLY
The following Component List and step-by-step assembly instructions are provided to make the set-up of this treadmill
as quick and easy as possible.