Smith Machine PL06 Unpacking & Assembly Instructions
12
HARDWARE
The parts bag holds the nuts, bolts, washers, end cap washers, and end caps. These are
shown below.
0123456
½½½½½½
A
B
CDE F
Hardware Figure 1. Back and Front Brace Parts.
The parts shown in Hardware Figure 1 are used to bolt the front and back braces to the
Smith Machine PL06. They are:
A. 4-1/4” Hex head bolt (used to bolt the front and back supports to the sides) (6)
B. 4” Hex head bolt (used as the top bolt on the back support) (2)
C. End caps (bolt covers) (20)
D. Flat washer (used to “shorten” bolt so end cap will fit on the nut) (10)
E. End cap washers (end caps snap onto them) (20)
F. 3/8” Locknut (10)