(Changing a workout:)
6.The MESSAGE CENTER displays “PRESS ENTER TO EDIT MY WORKOUTS - PRESS MY WORKOUTS TO ACCESS STATISTICS”. Press ENTER.
7.The MESSAGE CENTER displays “SELECT WORKOUTS”. By factory default all four workouts under MY WORK- OUTS are MANUAL programs. Enter setup information as prompted by the MESSAGE CENTER, using the ARROW keys to scroll through displayed variables, and pressing the ENTER key to accept a variable. Once all infor- mation is entered, the MESSAGE CENTER displays “WORKOUT SAVED”. Several seconds later, the MESSAGE CENTER again displays “PRESS ENTER TO EDIT MY WORKOUTS - PRESS MY WORKOUTS TO ACCESS STATISTICS”. Press ENTER to repeat step 7 for the selected workout, or press MY WORKOUTS, and proceed with step 8.
(Viewing statistics:)
8.The MESSAGE CENTER display “HOURS =” followed by a value. Scroll through each of the displayed statistics by pressing the MY WORKOUTS key. Statistics may be cleared at any time by pressing and holding the PAUSE/CLEAR button for two seconds while a statistic is displayed. The statistic will be cleared and reset to zero. Once all statistics have been viewed, the console exits the MY WORKOUTS mode and returns to initial workout setup mode.
Note: At any point during these steps, it is possible to exit MY WORKOUTS mode, by pressing the the PAUSE/CLEAR key twice. Doing so returns the console to initial workout setup mode, at which point, the MES- SAGE CENTER displays “SELECT WORKOUT OR PRESS QUICK START”.
33
