Life Fitness Smith Machine owner manual Maintenance, Once a Week, Once a Month, Inspect

Signature Smith Machine

Maintenance

ONCE A WEEK

Visually inspect all hardware, including jam nuts, for loosening, tampering or wear.

Check condition of hand grips.

ONCE A MONTH

Inspect hardware and tighten any bolts or nuts that may have loosened during use.

Clean Guide Rods with Break-Free®on a cotton cloth wipe off old residue. Clean visible sides of linear bearings on carriages.

Check Jam Nuts on Rod Ends for tightness.

ACTION	DAILY MONTHLY BI-ANNUALLY	AS NEEDED
CLEAN
Hand Grips		X
Guide Rods	X
INSPECT
Hardware	X
Frame	X
Hand Grips		X
Jam Nuts	X

CLEAN

Wax Frames with standard, non-abrasive wax finish.

Hand grips with mild soap and water.

Guide Rods with cotton cloth and Break-Free®(SK50-P0005-0000).

INSPECT

Hardware should be checked for looseness. Tighten as required using metric tools.

Frames should be inspected for wear or damage.

Hand grips should be checked for wear or damage.

All paint chips should be filled immediately with touch-up paint.

NOTE: Use polishing compound (such as car wax) to clean and remove shoe scuffs from frame surfaces as necessary.

NOTE: For parts and service call Customer Support Services at (800)351-3737 or (847)451-0036, Monday through Friday 8:00 a.m. to 6:00 p.m. Central Standard Time. Please have available your name, address and serial number of your product.

© 2007 Life Fitness, a division of Brunswick Corporation. All rights reserved. Life Fitness is a registered trademark of Brunswick Corporation.

SSM 10/12/07 8376701 RevA-1