Treadmill User Manual: T5-0, T5-5, & T7-0
ASSEMBLY INSTRUCTIONS
TSeries

T

LIFEFITNESS.COM
Life Fitness offers a full line of premier fitness equipment for the home.
LIFECYCLE EXERCISE BIKES | TREADMILLS | TOTAL-BODY ELLIPTICALCROSS-TRAINERS | STAIRCLIMBERS | GYM SYSTEMS

Where does your workout take you?

Check the Hardware List
1
Hardware Needed
Actual Size
A
B
Item Qty Description
A12 M10 x 25mm long hex head bolt
B12 M10 internal tooth star washers
C2 #10 x 1/2" phillips self tapping screws
D4 #6 x 3/8" long phillip screws
E1 Hex key wrench
©2005 Life Fitness, a division of Brunswick Corporation. All rights reserved. Life Fitness is a trademark of Brunswick Corporation. CO-039-05 (09.05)
AB
2
3
Remove the top of the cardboard box. Pull out the console
uprights and console bridge and remove plastic wrapping.
Tear down front lip of bottom box. Lift the treadmill by the
rear tread roller and wheel forward off of the bottom box.
Remove the (2) screws securing
the front of the motor cover to the
front of the treadmill base. Lift the
front of the motor cover and slide
it forward, detaching the motor
cover from the back clips. Set the
motor cover and screws aside.
Bolt the left upright to the treadmill base
using (4) M10 x 25mm bolts and (4) M10
internal tooth washers as shown. Repeat
the procedure to attach the right upright.
Finger tighten the (8) bolts at this time.
Warning: Do not lift treadmill with forklift.
Warning: Do not lift treadmill by console.
OK59-01311-0000
PM-009-05 insturctions 9/27/05 9:18 AM Page 1