Lifebreath 155MAX RX, 200MAX RX, 155ECM Model 200ERV, Dimensions 200ERV inches mm

		Model 200ERV
ENGINEERING DATA
	PERFORMANCE
LATENT RECOVERY/MOISTURE TRANSFER CORE
The cross-flow energy recovery core transfers heat and water vapour
	Net supply airflow in cfm (L/s) against external static pressure
between the two airstreams. It is easily removed for cleaning or service.
	E.S.P	cfm			L/s
MOTORS AND BLOWERS
	@ 0.1” (25 Pa)	232			(109)
Each air stream has one centrifugal blower driven by a common PSC
motor. 5 speed fan operation. High speed - 120 VAC.	@ 0.2” (50 Pa)	223			(105)
FILTERS	@ 0.3” (75 Pa)	215			(102)
Washable air filters in exhaust and supply air streams.
MOUNTING THE ERV	@ 0.4” (100 Pa)	195			(92)
Four threaded inserts at corners of case designed to accept four PVC	@ 0.5” (125 Pa)	189			(89)
reinforced polyester straps that are supplied with the unit.
CASE	Sensible Effectiveness				67%
Twenty gauge prepainted galvanized steel (G60) for superior corrosion
	@ 127 cfm (60 L/s) (CSA C439M)
resistance. Insulated to prevent exterior condensation.
CONTROLS	Sensible Efficiency	32°F (0	O	C)	60%
ControlAir 15 - Standby/ON mode, 20 ON/ 40 OFF mode, Recirculation
mode (on compatible units), (each mode has 5 speeds). Control pad can	Total Efficiency				55%
be removed from HRV and remotely mounted.
Weight 63 lbs. (28.7 kg) Shipping Weight 65 lbs. (29.6 kg)
	VAC @ 60HZ				120
	WATTS / Low speed				87

DIMENSIONS 200ERV inches (mm)

*All Duct Connections 6"(150mm)

ENTHALPIC CORE

STALE AIR	MOTOR
FROM INSIDE
BALANCING
DAMPER
FILTERS
FRESH AIR
FROM OUTSIDE
	33-5/8"
	(850)

FRESH AIR TO INSIDE

BALANCING

DAMPER

STALE AIR

TO OUTSIDE

BLOWERS

19" (483)

*NOTE: Front clearance of 25 inches (635 mm) is recommended

for servicing unit.

143/4"

(375)

OPTIONS

99-104 Digital Electronic Timer - 20/40/60 min. (3 wire)

99-109 Air Sentry™ Air Quality Monitor designed to accept remote-

ly mounted Control Pad

99-186 Weatherhoods, Two - 6” (150mm) c/w 1/4” (6mm) mesh screen

WARRANTY

Units carry a 5 year warranty on the energy recovery core and replace- ment parts.

ERVs are not recommended for regions where the design temperature is below 25°F (-4°C)

200ERV FANCURVE 5 HIGH SPEED*

	200					4	MEDIUM HIGH SPEED
		5
			?	Manufacturers Data		3	MEDIUM SPEED
	175		*			2	MEDIUM LOW SPEED
	150	4				1	LOW SPEED
(cfm)		3
	125
		2
Flow	100
		1
Air	75
	50
	25
	0
	0.3	0.4	0.5	0.6	0.7	0.8	0.9	1.0

Static Pressure (in H2O)

All units conform to

CSA and UL standards.

TI-98E

14 0805