INJECTING YOUR INSULIN
æBefore beginning, read Important Information on page 65.
To begin preparation for injecting your insulin, pull out the InDuo™ insulin doser. Do not press any buttons on the meter cap while you remove the insulin doser. Attach a NovoFine® needle. You will then be ready to prime your insulin doser and dial your insulin dose. If your InDuo™ insulin doser contains an insulin suspension (cloudy insulin) you must resuspend the insulin by turning the InDuo™ insulin doser up and down as described on page 21 of this manual and in the Penfill® package insert.
How to attach a NovoFine® needle
•Pull out the InDuo™ insulin doser.
•Take the protective tab off the NovoFine® needle and screw the needle firmly onto the Penfill®
•Pull off the outer and inner needle caps before priming your insulin doser. (See page 24 or 42).
INJECTING YOUR INSULIN 41
a