READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE

This fixture is intended for installation in accordance with the National Electrical Code and local regulations. To

assure full compliance with local codes and regulations, check with your local electrical inspector before

installation. To prevent electric shock, turn off electricity at fuse box before proceeding.

Retain these instructions for maintenance reference.

INSTRUCTION SHEET NO.

IS:C4X4MR

B0707

 

Page 1 of 2

INSTALLATION INSTRUCTIONS FOR 4” MATRIX RECESSED MR-16 DOWNLIGHT, ADJUSTABLE ACCENT and LENSED WALLWASH TRIMS.

CAUTION: (RISK OF FIRE) DO NOT INSTALL INSULATION ABOVE NOR WITHIN 3 INCHES (76mm) OF ANY

PART OF THE LUMINAIRE (LIGHTING FIXTURE)

CAUTION: USE ONLY ROUGH-IN SECTIONS PROVIDED BY LIGHTOLIER. USE OF OTHER MANUFACTURERS’ ROUGH-IN KITS

WILL VOID THE UNDERWRITERS LABRATORIES LISTING AND COULD CONSTITUTE A FIRE HAZARD.

CEILING

ADJUSTMENT

MECHANISM

SOCKET

SPRING

CLIPS

SUB-

ASSEMBLY

 

Adjustable Accent Trim:

CEILING

This trim is provided with a lampholder assembly, lamp

 

adjustment mechanism/sub-assembly and a lower reflector unit.

 

1.

Separate LOWER REFLECTOR from SUB-ASSEMBLY. Set

 

 

LOWER REFLECTOR aside.

 

2.

Feed SOCKET through lamp opening as shown. Install

 

 

SUB-ASSEMBLY into F.I.K. (in ceiling) by pushing through

 

 

ceiling opening until flush with ceiling.

 

3.

** To install MR16 Incandescent lamp, see LAMPING

 

 

INSTRUCTIONS FOR MR16 INCANDESCENT instructions

 

 

on page 2.

 

 

** To install HID MR16 please refer to the lamping

 

 

instructions that ship with the lampholder in the HID frame.

 

4.

Lamp tilt angle is adjusted via screw marked “TILT”.

 

5.

To adjust rotational position of lamp, loosen screw marked

 

 

“ROTATION”, and manually rotate lamp assembly until

 

 

desired position is reached. Tighten screw to lock.

 

6.

Install LOWER REFLECTOR into SUB-ASSEMBLY until

 

 

flange is flush with ceiling.

LOWER

REFLECTOR

FINISHED INSTALLATION

Downlight Trim:

This trim is provided with a downlight sub-assembly, lampholder assembly, and a lower reflector unit.

1.Separate LOWER REFLECTOR from SUB-ASSEMBLY. Set LOWER REFLECTOR aside.

2.Feed SOCKET through lamp opening as shown above. Install SUB- ASSEMBLY into F.I.K. (in ceiling) by pushing through ceiling opening until flush with ceiling.

3.** To install MR16 Incandescent lamp, see LAMPING

INSTRUCTIONS FOR MR16 INCANDESCENT instructions on page 2.

**To install HID MR16 please refer to the lamping instructions that ship with the lampholder in the HID frame.

4.Install LOWER REFLECTOR into SUB-ASSEMBLY until flange is flush with ceiling.

LAMP

OPENING

SUB-

ASSEMBLY

LOWER

REFLECTOR

A GENLYTE COMPANY

631 Airport Road, Fall River, MA 02720

Page 1
Image 1
Lightolier installation instructions ISC4X4MR, Adjustable Accent Trim

C4X4MR specifications

Lightolier has long been a trusted name in the world of lighting, known for producing high-quality products that meet the demands of both residential and commercial applications. Among their impressive range of offerings is the C4X4MR, a cutting-edge lighting solution that combines advanced technologies and functionality to create versatile and efficient illumination.

The Lightolier C4X4MR is designed with both aesthetics and performance in mind. One of its main features is its sleek and modern design, which allows it to blend seamlessly into various environments, whether it be in a contemporary office space, a retail store, or a stylish home. The fixture is available in different finishes, allowing for personalization and adaptation to different decor styles.

One of the standout technologies in the C4X4MR is its use of innovative LED technology. LEDs are known for their energy efficiency and longevity, drastically reducing operating costs compared to traditional lighting solutions. The C4X4MR comes equipped with high-quality LED modules that provide bright, consistent light output while consuming minimal power. This not only benefits the environment but also results in substantial savings on energy bills.

Another defining characteristic of the C4X4MR is its flexible lighting capabilities. The fixture is designed to accommodate a wide range of applications, thanks to its adjustable features. Users can easily modify the direction of the light to highlight specific areas or create various lighting effects. This versatility makes it an ideal choice for spaces that require dynamic lighting solutions.

The C4X4MR also boasts excellent color rendering properties. With a high Color Rendering Index (CRI), this fixture ensures that colors appear true to life, making it suitable for environments where accurate color representation is essential, such as art galleries or fashion retail stores.

In terms of installation and maintenance, the Lightolier C4X4MR is user-friendly. Its lightweight design facilitates easy installation, while the long lifespan of the LED modules minimizes the need for frequent replacements. This means less downtime and disruption in any given space.

In summary, the Lightolier C4X4MR symbolizes a perfect blend of modern design, energy efficiency, versatility, and excellent performance. With its advanced LED technology and customizable features, it stands as a premier lighting solution for any setting, ensuring both functionality and style are maintained.