Lightolier CAM250ND dimensions Atom Addressable Track Module System, Camlrc, Atom Programs Scenes

Addressable Track Dimming Module Lytespan® Track Lighting System CAM25OND

Page 2 of 2

ATOM Addressable Track Module System

Addressable Track Non-Dim On/Off Module

Will dim or switch power ON or OFF to a luminaire via remote control. Module will function with incandescent line voltage, incandescent low volt- age, metal halide and fluorescent luminaires, 250W MAX. Module attaches anywhere along track. Accepts commands from Laser Remote Control and Wall Remote Control units. Can be combined with Track Master Module to create several different lighting effects.

See separate specification sheet for additional details before specifying this unit.

CAM250NDWH (Matte White)

CAM250NDBK (Matte Black)

7 1/4"

1 9/16"

1 9/16"

2 1/16"

4 11/16"

Track Master Module

Sends control signals along the track to other modules from any location on the track. Used to create cycle scenes, lighting effects, and dim, raise, or turn on or off the light levels on all modules on the track simultaneously. Use one track master per track branch circuit. Accepts commands from Laser Remote Control and Wall Remote Control units.

See separate specification sheet for additional details before specifying this unit.

CAMTMWH (Matte White)

CAMTMBK (Matte Black)

7 1/4"

1 9/16"

1 9/16"

4 11/16"

Laser Remote Control

Used to program the system and change light levels from a remote location. Equipped with a laser and infrared (IR) transmitters. The visible laser signal, when pointed at a module, places the module in program mode.

The laser signal accuracy allows a single unit to be selected easily when multiple modules are on the track & the IR signal programs the desired functions. The remote will allow the user to set the light level, turn modules on or off, set and run multiple lighting scenes, set fade rates, set cycle times, and begin and end cycles. The remote operates the Dimming Module, Non-Dim On/Off Module, and Track Master Module.

See separate specification sheet for additional details before specifying this unit.

CAMLRC

2 1/16" 5/8"

3 1/43"

Wall Master Control

Used to control Addressable Track Dimming & Non-Dim On/Off Modules in the track in order to activate programs in the system from a wall location. The wall remote will allow the user to run multiple programmed lighting scenes and to begin and end cycles. A Track Master Module must be used with the Wall Remote Control, in order to control the modules in the system to run the effects.

See separate specification sheet for additional details before specifying this unit.

CAMWRCWH (Matte White)
CAMWRCI (IVORY)	2 3/4"		1 1/4"
	(69.85)	(31.75)

4 1/2"

(114.3)

ATOM PROGRAMS

SCENES:

Lighting effects and light levels can be stored in each module for use at any time.

Each group of stored settings is called a scene. Each module can store 6 scenes.

FADE - Effects:

The time transition between scenes can be programmed into each module. The units are pre-programmed with a 3 second fade rate from the factory.

CYCLE - Effects:

This Function requires a Track Master Module. The modules will cycle through their scenes in a continuous loop. You can cycle through scenes, cycle on, or cycle off. Up to 6 Cycle effects can be programmed.

For a detailed explanation of operation, please see the ATOM Operations Manual.

Job Information	Type:
Lightolier a Genlyte company	www.lightolier.com

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2005 Genlyte Group LLC • C0705