Lightolier LP-17 manual Module Ordering Information, Features, Electrical, Mountings, Options

						Lighting Systems LP-17
1BHF  PG  -JOFBS 1FSG-ZUFÜ  DN 1FSG-PVWFS -JHIU 5 1FS h DN /PNJOBM 4FDUJPO
3”
(7.62cm)			Perf			4.20”
						(10.67cm)
1	2	3	4	5	3.22” (8.18cm)
					13” (33.02cm)
					98” (248.92cm)
			2” (5.08cm)		2” (5.08cm)	2” (5.08cm)

Module Ordering Information

Style	Series	Type
LP	2	D

Complete ordering instructions below.

Bottom View

Lamps Length BallastOptions

3T8

3T8 = 3-F32T8	4 = 4-Foot	U = Universal Voltage	Blank = No Options
	8 = 8-Foot	E = Emergency Pack	DS = A-B Switch
		D1 = Dimming 120v	X4 = 4 Wire for Dimming &
		D2 = Dimming 277v	Switched Emergency

Features

1.Housing: 18 gauge perforated steel with 51% open hole pattern. Holes are 1/8” (0.32cm) diameter on 5/32” (0.40cm) centers. Die-formed steel end cap with concealed access holes for through wiring. No exposed fasteners or hardware.

2.Lamping: Three T8 32 watt fluorescent lamps per 4-foot section. Provided by others.

3.Reflector: Precision die-formed CRS painted high reflectance white.

4.Diffuser: Opal acrylic diffuser.

5.Louver: Straight blade louver painted white to match housing. 3-1/4” (8.26cm) wide by 1” (2.54cm) high with 1-1/2” (3.81cm) blade spacing.

Electrical

Ballast is universal voltage, <10% THD, .88 ballast factor, instant start. 3 con- ductor, 18 gauge wire. Color-coded quick connectors allow ease of connection for joiner modules. For special circuiting consult factory. Cord is 18/3 SJT. Factory installed ballast disconnect allows the ballast to be disconnected from and reconnected to incoming power under load without turning the entire circuit off. Dimming: 120/277 VAC, 4 wire feed required.

Emergency Battery Pack: 40 watt: 450 lumens @ 90 minutes.

Mountings

Cable Suspension (not shown) - 4-1/2” (11.43cm) diameter flat canopy finished white enamel, 1/16” (0.16cm) diameter stainless steel aircraft cable adjustable up to 36” (91.44cm) without cutting. Overlap connector to provide 46” (116.84cm) of perforated and 2” (5.08cm) solid sections contiguously without the presence of hairline connections. (See Bottom View drawing above)

Options

Dual Switching: Order the DS option for separate row switching. DS option automatically ships witht he X4 option included.

4 Wire: Order X4 modules for remainder of the run when using dimming and/or switched emergency battery pack modules. Also, order the 4 Wire Cord Power Feed End Sets (LP2EC36X4) when using 4 Wire Modules.

Emergency Circuiting: Special circuiting - consult factory.

Ordering Information

Individual Fixtures:

1.Order number of MODULES required.

2.Order one POWER FEED END SET per MODULE.

Continuous Rows:

1.Determine run length.

2.Order the appropriate number of MODULES for the complete run.

3.Order one POWER FEED END SET per run.

4.Order one CABLE ASSEMBLY per MODULE minus one per run.

5.For runs that exceed amperage limits, order the appropriate number of SINGLE CABLE & CORD FEEDS.

Finish

Powder coated baked white enamel. Custom colors available, consult factory.

Labels

UL, cUL and I.B.E.W.

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:


"JSQPSU
3PBE
'BMM
3JWFS
."

t


t
'BY



We reserve the right to change details of design, materials and finish.

XXXMJHIUPMJFSDPN
½

1IJMJQT
(SPVQ
t #