Lincoln Electric 300 technical specifications Wire Feeder Options, Plasma Cutting

RECOMMENDED OPTIONS

Precision TIG® 225

Ready-Pak®Pkg.

For AC TIG Welding with square wave performance use the AC generator of the engine-driven welder to supply the power (full rated output may not be available). Easy setup. Includes torch, Foot Amptrol® and Gas Regulator & Hose. Re-quires the K1816-1 Full KVA adapter kit.

Order K2535-1

Invertec® V205-T AC/DC

One-Pak®Package

For AC TIG welding with square wave performance, use the AC generator of the engine-driven welder to supply the power. Easy setup. Includes torch, parts kit, regulator and hose kit, Twist-Mate™torch adapter, work cable with Twist-Mate end and foot Amptrol®. Requires K1816-1 Full-KVA Adapter Kit.

Order K2350-2

Full - KVA Adapter Kit (1-Phase) Provides convenient connection of Lincoln Electric equipment having a 240V AC 1-phase plug (NEMA 6-50P) to the full-KVA receptacle on Lincoln engine-driven welders.

Order K1816-1

WIRE FEEDER OPTIONS

LN-25 PRO Wire Feeder Portable CC/CV unit for flux-cored and MIG welding with MAXTRAC® wire drive system. Includes gas solenoid and internal contactor.

Order K2613-1

Magnum® 350 Innershield Gun

(for LN-25 PRO)

For self-shielded wire with 15 ft. (4.5 m) cable. For .062"-3/32" (1.6-2.4 mm) wire.

Order K126-2

LN-23P Wire Feeder

Portable CV unit for Innershield pipe welding. Includes drive rolls and guide tubes. Requires K2393-1 or -2 Input Cable Assembly and Magnum® Innershield® Gun.

Order K316L-2

Input Cable Assembly for LN-23P 8-socket to 14-pin control cable with lugged electrode cable for K316L-2 LN- 23P Wire Feeder.

Order:

K2393-1 25 ft (7.6 m)

K2393-2 75 ft (22.9 m)

Magnum® 350 Innershield® Gun (for LN-23P)

Rated 350 amps, 60% duty cycle. For

.068"-5/64" (1.7-2.0 mm) Innershield® wire and includes reduced speed switch.

Order K345-10

Magnum® SG Spool Gun

Hand held semiautomatic wire feeder. Requires SG Control Module and Input Cable.

Order K487-25

SG Control Module

The interface between the power source and the spool gun. Provides control of the wire speed and gas flow. For use

with a spool gun.

Order K488

Input Cable

(For SG Control Module)

For Lincoln engine power sources with 14-pin MS-type connection, separate 115V NEMA receptacles and output stud connections.

Order K691-10

PLASMA CUTTING

Drive Roll and Guide Tube Kit

(for LN-25 PRO)	Pro-Cut®55
	Cuts metal using the AC generator
For cored or solid steel wire.
	power from the engine-driven welder.
Order KP1697-068
	Accepts 3-phase or 1-phase input
for .068"-.072" (1.8 mm)
	power. Requires the K1816-1 Full KVA
KP1697-5/64
	adapter kit, if connected for 1-phase
for 5/64" (2.0 mm)
	input power.
	Order K1580-1
Magnum® 300 MIG Gun
For .035"-.045" (0.9-1.2 mm) gas-	Full-KVA Adapter Kit (1-Phase)
shielded wire with 15 ft. (4.5 m) cable.
	Provides convenient connection of
LN-25 PRO Order:
	Lincoln Electric equipment having a
K1802-1(Includes Connector Kit)
	240V AC 1-phase plug (NEMA 6-50P)
	to the full-KVA receptacle on Lincoln
Drive Roll and Guide Tube Kit	engine-driven welders.
	Order K1816-1
(for LN-25 PRO)
For .035" and .045" (0.9-1.1 mm)
solid steel wire.
Order KP1696-1	Vantage® 300
[7]	www.lincolnelectric.com