Lincoln Electric 305G manual Stick

E-5	TROUBLESHOOTING	E-5
	Observe all Safety Guidelines detailed throughout this manual

PROBLEMS

(SYMPTOMS)

POSSIBLE

CAUSE

RECOMMENDED

COURSE OF ACTION

The welding arc is “cold.” The weld- 1. Make sure the MODE selector
ing arc is not stable or is not satis-	switch is in the correct position for
factory. the engine runs normally.	the process being used. (For
The auxiliary power is normal.	example, CV-WIRE, PIPE, CC-
	STICK.)

2.Make sure the electrode (wire, gas, voltage, current etc.) is cor- rect for the process being used.

3.Check for loose or faulty connec- tions at the weld output terminals

and welding cable connections.	If all recommended possible areas of
	misadjustment have been checked
4. The welding cables may be too and the problem persists, Contact
long or coiled, causing an exces- your local Lincoln Authorized
sive voltage drop.	Field Service Facility.

CAUTION

If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.

RANGER 305G