Lincoln Electric 305G manual Warni NG

RANGER 305G

ENGINE WELDERS LN/-8CONNECTION DIAGRAM

WARNI NG

ELECTRI C SHOC K can ki l l	MO VI NGPART S can	i njure
Do not operate wi ht panel sopen.	Keep guards ni place.
Di sconnect NEGATIVE ()- Battery eadl	Keep away f rmo moving part s.
before servi cing.	Only qual i fdi per sonnel should	nstali luse,
Do not touch elect r ialcyl l ievpart s.	or servi ce thi sequipment.

14 PIN		TO NL-8NPUTI
AMPHENOL
		CABLE PLUG
+	_	K595CONTROLCABLE

TO WORK

ELECTRODE CABLE

TO WIRE FEED UNIT

CAUTION

ANY INCREASE OF THE HIGH IDLE ENGINE RPM BY CHANGING THE GOVERNOR SETTING OR OVERRIDING THE THROTTLE LINKAGE WIL AN INCREASE IN THE AC WIRE FEEDER VOLTAGE, WHICH CAN DAMAGE THE CONTROL CIRCUIT. THE ENGINE GOVERNOR SETTING IS AT THE FACTORY — DO NOT ADJUST ABOVE RPM SPECIFICATIONS LISTED IN THE ENGINE WELDER OPERATING MANUAL.

N.A. WELDING CABLES MUST BE OF PROPER CAPACITY FOR THE CURRENT AND DUTY CYCLE OF IMMEDIATE AND FUTURE APPLICATIONS. SEE OPERATING MANUAL.

N.B. CONNECT WELDING CABLES TO OUTPUT STUDS FOR DESIRED POLARITY. POSITION THE WIRE FEEDER VOLTMETER SWITCH TO MATCH THE POLARITY OF THE ELECTRODE CABLE.

N.C. PLACE IDLER SWITCH IN HIGH POSITION.

4-14-2000

S24787-6

F-6

DIAGRAMS

F-6