Lincoln Electric DC-400 manual 1MAINTENANCED-1, Routine Maintenance

D-1MAINTENANCED-1

SAFETY PRECAUTIONS

WARNING

-----------------------------------------------------------------------

ELECTRIC SHOCK can kill.

•Have an electrician install and ser- vice this equipment.

•Turn the input power off at the fuse box before working on equipment.

•Do not touch electrically live parts or electrode with skin or wet clothing.

•Insulate yourself from work and ground

•Always wear dry insulating gloves.

------------------------------------------------------------------------

See additional warning information throughout this operator’s manual and the Engine manual as well.

-----------------------------------------------------------

ROUTINE MAINTENANCE

1.The fan motor has sealed bearings which require no service.

2.In extremely dusty locations, dirt may clog the air channels causing the welder to run hot. Blow out the machine at regular intervals.

3.In extremely dusty locations, dirt may accumulate on the remote control terminal strip TS1. Wipe or blow this terminal strip off at regular intervals. This is particularly important in damp locations.

IDEALARC® DC-400