A-1

INSTALLATION

A-1

TECHNICAL SPECIFICATIONS - DX450 (K2712-1)

INPUT - DIESEL ENGINE

Make/Model

KUBOTA 2403-M

Description

4cylinder 35.4 HP

1800 RPM

Speed (RPM)

High Idle 1880

Full Load 1800

Low Idle 1400

Displacement cu. in. (ltrs.)

148.5(2.4)

Bore x Stroke inch (mm) 3.43” X 4.03”

(87.1 x 102.4mm)

Starting

System

12VDC Battery & starter

(Group 34; 650 cold crank amps)

40Amp Alternator

Capacities

Fuel: 20 gal. (75 L)

Oil: 10Qts. (9.5L)

Radiator Coolant: 8.0 Qts. (7.6L)

RATED OUTPUT @ 104° F (40° C) - WELDER

Welding Process

Welding Output

Output Range

Max. Weld OCV

 

Current/Voltage/Duty Cycle

 

@Rated Load RPM

 

400A / 36V / 100%

 

 

DC Constant Current

450A / 32V / 100%

30 TO 500 AMPS

 

 

 

 

 

DC Pipe Current

300A / 32V / 100%

40 TO 300 AMPS

2

 

 

 

60 Volts

Touch-Start™TIG

250A / 30V / 100%

20 TO 250 AMPS

 

DC Constant Voltage

400A / 36V / 100%

 

 

 

450A / 32V / 100%

14 TO 36 VOLTS

 

Arc Gouging

400A / 36V / 100%

90 TO 450 AMPS

 

RATED OUTPUT @ 104° F (40° C).- GENERATOR

Auxiliary Power 1

12,000 Watts Peak, / 11,000 Watts Continuous, 60 Hz 120/240 Volts Single Phase

19,000 Watts Peak, / 17,000 Watts Continuous, 60 Hz, 240 Volts 3-Phase

ENGINE

LUBRICATION

 

EMISSIONS

 

 

FUEL SYSTEM

 

 

 

GOVERNOR

Full Pressure

EPA Tier 4 Interim

 

Mechanical Fuel Pump, Auto air bleed

 

 

 

Electronic

with Full Flow Filter

 

Compliant

 

 

system, Electric shutoff solenoid, Indirect fuel injector.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AIR CLEANER

ENGINE IDLER

 

 

MUFFLER

 

ENGINE PROTECTION

 

 

 

 

 

 

Low noise Muffler:

 

 

Shutdown on low oil

Single Element

 

Automatic Idler

 

Top outlet can be rotated.

 

 

pressure & high engine

 

 

 

 

 

 

Made from long life, aluminized steel.

 

coolant temperature

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MACHINE SPECIFICATIONS

 

 

 

 

 

RECEPTACLES

 

AUXILIARY POWER CIRCUIT BREAKER

OTHER CIRCUIT BREAKERS

 

 

 

 

 

 

 

 

(2)120VAC Duplex (5-20R)GFCI Protected

 

Two 20AMP for Two Duplex Receptacle

10AMP for Battery Charging Circuit

(1) 120/240VAC Dual Voltage

 

(1) 50AMP for Dual Voltage and for

10AMP for 42V Wire Feeder Power

Full KVA (NEMA SSR-50R)

 

3-Phase (3-pole)

 

 

 

 

 

(1) 240VAC 3-Phase (15-50R)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PHYSICAL DIMENSIONS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HEIGHT

 

WIDTH

 

DEPTH

 

 

WEIGHT

35.94* in.

 

25.30 in

 

60.00 in.

 

 

 

 

 

 

 

 

 

1245lbs. (565kg.)

 

913 mm

 

643 mm

 

1524 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LIFT BAIL WEIGHT RATING 2000 LBS. (907KG.) MAXIMUM

1.Output rating in watts is equivalent to volt-amperes at unity power factor. Output voltage is within ± 10% at all loads up to rated capacity. When welding, available auxiliary power will be reduced.

*To Top of enclosure, add 10.68”(271.3mm) to top of exhaust pipe. Add 6.67”(169.4mm) to top of Lift Bail.

2. Reduced to less than 32V in the CC-stick Mode when VRD (VOLTAGE REDUCTION DEVICE) is on.

DX450 (RED-D-ARC)

Page 9
Image 9
Lincoln Electric specifications Installation, Technical Specifications DX450 K2712-1