Output Connections, TIG Torch Connection | Lincoln Electric IM10059

A-4	INSTALLATION	A-4

SFEOR LOW TTAR DE		LVOATEG
N:H2NOC ETCE	D
FHORGI H TSE	ETRA	D LVOATEG
N:H3NOC ETCE	D

LDEA	H1
(DOON	T
REM OVE	)

TNIUP ELDA S

L1 & L2

CAWEKIB

V F OENIL SWITCH

FIGURE A.1 Reconnect Leads

OUTPUT CONNECTIONS

ELECTRODE/GAS OUTLET

RECEPTACLE

WORK CABLE & CLAMP

FIGURE A.2 Location of Output Connections

CONNECTIONS FOR TIG (GTAW) WELDING

TIG TORCH CONNECTION

Refer to Included Equipment in the Operation Section of this manual for TIG welding equipment which is included with the SQUARE WAVE™ TIG 175.

A TIG welding torch with cable and connector is sup- plied with the welder. Turn the Power Switch “OFF”. Connect the torch cable quick connect plug into the Electrode/Gas Output Receptacle on the front of the welder and turn it clockwise until it is tight. This is a quick connect terminal and also provides the gas con- nection for the shielding gas to the torch.

WARNING

To avoid receiving a high frequency shock, keep the TIG torch and cables in good condition.

__________________________________________

WORK CABLE CONNECTION

A work cable with attached work clamp is factory con- nected to the SQUARE WAVE™ TIG 175. To minimize high frequency interference, refer to Machine

Grounding and High Frequency Interference Protection section of this manual for the proper pro- cedure on grounding the work clamp and work piece.

SHIELDING GAS CONNECTION

An adjustable gas pressure regulator and flow gage is supplied with the SQUARE WAVE™ TIG 175. Obtain the necessary inert shielding gas (usually argon). Connect the cylinder of gas with the pressure regulator and flow gage. Install the gas hose between the regu- lator and gas inlet (located on the rear of the welder). The gas inlet has a 5/16-18 right hand female thread; CGA #032.

The optional undercarriage features a pivoting platform that simplifies loading and unloading of gas cylinders.

WARNING

CYLINDER could explode

if damaged.

• Keep cylinder upright and chained to a support.

•Keep cylinder away from areas where it could be damaged.

•Never allow the torch to touch the cylinder.

•Keep cylinder away from live electrical cir- cuits.

•Maximum inlet pressure 150 psi.

___________________________________________

A cylinder is loaded by leaning it slightly sideways and rolling it toward the platform. The cylinder’s weight will push the platform downward against the floor, forming a ramp. At this point, the cylinder may be rolled up the platform into its final position. Secure the cylinder in place with the provided chain. Unload by following these steps in reverse.

SQUARE WAVE™ TIG 175

IM10059 specifications

Lincoln Electric’s IM10059 is a multifunctional welding machine that brings together cutting-edge technology and user-friendly features, making it a top choice for professionals and enthusiasts alike. This unit is particularly known for its versatility, capable of handling various welding processes, such as MIG, TIG, and Stick welding, making it suitable for a wide range of applications from automotive repair to heavy fabrication.

One of the standout features of the IM10059 is its robust arc performance, which is backed by Lincoln Electric's decades of expertise in welding technology. The machine is designed to deliver a stable, high-quality arc with minimal spatter, ensuring clean, precise welds every time. This performance is crucial for industries where quality and efficiency cannot be compromised.

The IM10059 also incorporates advanced inverter technology, which enhances its efficiency and reduces energy consumption compared to traditional welding machines. This inverter design allows for a lighter, more portable unit without sacrificing power or performance. Users find that they can easily transport this machine to job sites or move it around the workshop without the hassle of heavy equipment.

In terms of usability, Lincoln Electric has equipped the IM10059 with an intuitive interface. The user-friendly controls allow welders to easily adjust settings such as voltage and wire feed speed, ensuring that even those new to welding can achieve professional results. The machine also includes advanced features such as automatic thermal protection, which prevents overheating and prolongs the lifespan of the unit.

Another notable characteristic of the IM10059 is its compatibility with a variety of wire and electrode types, adding to its versatility. This feature means that users can switch between welding tasks without needing additional equipment, streamlining the workflow.

Safety is also a priority, and Lincoln Electric has integrated several protective features in the IM10059. These include a built-in gas solenoid valve, safety shut-off mechanisms, and compliance with industry standards, ensuring that users can operate the machine with peace of mind.

Overall, the Lincoln Electric IM10059 stands out in the market for its combination of innovative technology, user-centric design, and robust performance characteristics. Whether for professional fabrication or home improvement projects, this welding machine is an excellent investment for anyone looking to elevate their welding capabilities. Its blend of portability, efficiency, and ease of use makes it a reliable choice in the demanding landscape of welding applications.

Lincoln Electric IM10059 manual Output Connections, Connections for TIG Gtaw Welding

Models: IM10059

INSTALLATION