UTILITY CART | ||
|
|
|
PRODUCT DESCRIPTION
The K520 Utility Cart is designed for mounting and transporting the Lincoln family of small SP and Weld- Pak type welders and the small AC types. It has provi- sions for mounting a single gas cylinder when used with a SP type welder or
This unit is compact enough for home use, yet rugged enough for commercial use. It is easily moved on front swivel casters, and large, easy rolling rear wheels. A unique feature is the adjustable height handle, which allows comfortable and convenient operation by any operator. In addition to space for a welder and gas bottle, space has been provided for carrying the oper- ator’s tools and welding accessories.
SPECIFICATIONS
CYLINDER CAPACITY:
Maximum Outside Diameter 8.1" (20.6cm) Maximum Height 46" (117cm)
Maximum Weight 100 lbs (45kg)
MAXIMUM CAPACITY:
Welder alone 100 lbs (45kg)
Welder with Gas Cylinder 200 lbs (90kg)
TOOLS REQUIRED FOR UTILITY CART ASSEMBLY:
Phillips Screwdriver (#I) 7/16 inch wrench Pliers
STEP 1
Carefully remove the cart, wheels, axle, handle, and the loose parts bag from the carton. Check the parts in the loose parts bag against the list provided. Note that some parts are used for assembling the cart, while those in the separate bag are for attaching your welder to the cart.
Leave all screws slightly loose until STEP 8.
STEP 2 (SEE FIGURE 1)
Carefully unfold the cart by raining the Front Upright to the vertical position. Insert one
CART ASSEMBLY INSTRUCTIONS
PARTS REQUIRED:
Part Number | Description | Required |
CF000141 | 2 | |
CF000017 | 2 | |
1/4 inch Lockwasher | 2 | |
Cotter Key | 2 | |
7 | ||
Plain Washer | 4 |
FIGURE 1
STEP 3 (SEE FIGURE 2)
Raise up the rear portion of the Top Shelf, and lift the Rear Upright. As the Rear Upright is raised, the Tank Support will become vertical. Insert the tabs in the bot- tom of the Tank Support into the corresponding slots in the Bottom Shelf. Lower the Top Shelf until it is sup- ported by the rear upright.
