Lincoln Electric IM468-A manual See Figure

A-2 A-2

FIGURE 2

STEP 4 (SEE FIGURE 3)

With the Rear Shelf still raised, install the right hand Vertical Gusset alongside the Tank Support. Begin by placing the tab in the bottom of the Vertical Gusset into the slot in the Bottom Shelf, just to the right of the Rear Upright. Insert the Vertical Gusset’s upper tab into the Rear Upright. Repeat this with the left hand Vertical Gusset. Lower the Top Shelf until it is sup- ported by the Rear Upright.

FIGURE 3

STEP 5 (SEE FIGURE 4)

Screw the Top Shelf and the Rear Support together using 10-24 x .375 screws. For easiest assembly, use two screws to first secure the sides of the Top Shelf to the Rear Upright. Next, put one more screw through the top of the Top Shelf, into the Rear Support.

FIGURE 4

STEP 6 (SEE FIGURE 5)

Secure the Rear Upright to the Bottom Shelf using one 10-24 x .375 screw.

FIGURE 5

STEP 7 (SEE FIGURE 5)

Place the remaining two screws through the sides of the Top Shelf into the Front Upright.