B-1

OPERATION

B-1

PRODUCT DESCRIPTION

The COOL ARC® 40 is a stand alone re-circulation cooling system designed for use with water-cooled TIG, MIG, PAC (Plasma Arc Cutting) and PAW (Plasma Arc Welding) guns and torches. The coolant "IN" and "OUT" connections are 5/8-18 left-hand female threads which match the standard connector nut of domestic water hoses (CGA style) and water- cooled TIG torches. The COOL ARC® 40 is a continu- ous duty cooler.

The overall size and shape of the cooler is identical to the Magnum 20. The COOL ARC® 40 can operate in either the vertical or horizontal position. The COOL ARC® 40 is very easy to use and understand with only one power switch on the control panel. The cool- er has an International 230V power input receptacle, making it very easy to power up. Adding coolant to the reservoir is simple and connecting to the coolant "IN" and "OUT" connections are easily made with an adjustable wrench.

The COOL ARC® 40 coolant flow is circulated through a heat exchanger to remove heat energy from the coolant. The coolant flow is then deposited into the coolant reservoir. The pump draws its coolant sup- ply from the coolant reservoir and delivers coolant to the welding torch or gun. Refer to Figure 6.

RECOMMENDED PROCESSES AND EQUIPMENT

The COOL ARC® 40 is designed for use with water- cooled TIG, MIG, PAC (Plasma Arc Cutting) and PAW (Plasma Arc Welding) guns and torches. The COOL ARC® 40 can be used with MIG wire feeders and power sources as well as TIG power sources.

The following should always be observed when oper- ating the COOL ARC® 40:

•High voltage typical of welding operations can kill.

•Immersion in water around electrical lines can cause electrical shock.

•Moving parts can injure. Never place fingers into openings of Cooler.

•Never operate the cooler with any case parts off or removed.

•Unplug the cooler before removing the wraparound or servicing the unit.

•Unplug the cooler before filling the reservoir.

•Hot coolant can burn skin. Always be sure coolant is NOT HOT before servicing the cooler.

•Do not pour used ethylene glycol coolant down the drain.

•Do not remove the pump relief valve's 3/4" hex nut or attempt to adjust the relief valve setting.

•Check the coolant reservoir level daily.

•Keep the reservoir full especially after changing any water lines.

•The cooler should be turned "OFF" when welding is not taking place for long periods of time.

•Be certain that the cooler is "ON" (power switch in the " l " position) before beginning to weld.

•Never operate the cooler with the reservoir fill cap removed. Unless checking coolant flow.

•Avoid placing the cooler near areas of extreme heat.

•Avoid placing the cooler near a flux hopper or an area where dust build-up is extreme.

•Avoid kinking or putting sharp bends in any water lines.

•Keep all water lines clean and free of any blockage.

•Do not operate cooler without coolant in reser- voir. Never run pump dry.

TURNING THE SYSTEM "ON"

After connecting the COOL ARC® 40 per the installa- tion instructions above, plug the unit into a International 230V electrical receptacle for start-up operation. Be certain that the power input into the unit matches the Cooler's rated input.

The POWER SWITCH is located on the right side of the control panel. The cooler will be "ON" when pressed to " l " and "OFF" when pressed to " O ".

You will be able to hear the fan running and feel air- flow out of the back of the unit when the cooler is operating. The cooler will run continuously unless it is plugged into a switched receptacle on the power source.

The coolant FLOW INDICATOR is accessed by removal of the fill cap. Actual return flow is directly vis- ible, via the fill opening with the unit in the vertical or horizontal position.

When first starting the unit, check all of the coolant hoses to insure that no water leaks are present. Water leakage causes poor welding performance, poor cooling performance, low welding component life and potential electrical safety hazards.

COOL ARC® 40

Page 12 Page 14
Page 13
Image 13
Lincoln Electric IM670-A manual Operation, Product Description
Page 12 Page 14

IM670-A specifications

The Lincoln Electric IM670-A is a state-of-the-art inverter-based multi-process welding machine, designed for versatility and efficiency across a range of welding applications. This model is specifically engineered to suit the needs of both novice and experienced welders, ensuring exceptional performance and ease of use.

One of the standout features of the IM670-A is its capability to handle a variety of welding processes including MIG, TIG, and Stick welding. This multi-process functionality makes it an ideal choice for fabrication shops, maintenance tasks, and DIY enthusiasts who require a tool that can adapt to different welding requirements. The unit is equipped with advanced inverter technology, which not only reduces the machine's overall size and weight but also enhances its energy efficiency. This means that the IM670-A provides excellent weld quality while consuming less power compared to traditional welding machines.

Moreover, the IM670-A boasts precise control over the welding parameters. The user-friendly interface comes with a digital display that allows welders to easily adjust voltage, wire feed speed, and other critical settings. This level of control contributes to a consistent and high-quality weld, catering to a wide range of materials, including stainless steel, aluminum, and mild steel.

In terms of safety, Lincoln Electric has integrated several protective features in the IM670-A. Over-voltage, under-voltage, and over-temperature protection systems ensure the machine operates safely even under demanding conditions. The robust design also allows for extended periods of use without overheating, making it a reliable choice for professionals.

Another key characteristic of the IM670-A is its portability. Weighing significantly less than traditional models, it comes with a convenient carrying handle, making it easy to transport to different job sites. Additionally, it operates efficiently on standard power outlets, eliminating the need for complex electrical setups.

Overall, the Lincoln Electric IM670-A is a powerful and versatile welding solution that combines advanced technology with user-friendly features. Its multi-process capabilities, precise control, safety mechanisms, and portability make it a valuable tool for welders across various industries. Whether for industrial, commercial, or personal projects, the IM670-A stands out as a reliable and efficient choice in the welding equipment market.
Top Page Image Contents