ii

SAFETY

ii

ELECTRIC SHOCK can kill.

3.a. The electrode and work (or ground) circuits are electrically “hot” when the welder is on. Do not touch these “hot” parts with your bare skin or wet clothing. Wear dry, hole-free

gloves to insulate hands.

3.b. Insulate yourself from work and ground using dry insulation. Make certain the insulation is large enough to cover your full area of physical contact with work and ground.

In addition to the normal safety precautions, if welding must be performed under electrically hazardous conditions (in damp locations or while wearing wet clothing; on metal structures such as floors, gratings or scaffolds; when in cramped positions such as sitting, kneeling or lying, if there is a high risk of unavoidable or accidental contact with the workpiece or ground) use the following equipment:

•Semiautomatic DC Constant Voltage (Wire) Welder.

•DC Manual (Stick) Welder.

•AC Welder with Reduced Voltage Control.

3.c. In semiautomatic or automatic wire welding, the electrode, electrode reel, welding head, nozzle or semiautomatic welding gun are also electrically “hot”.

3.d. Always be sure the work cable makes a good electrical connection with the metal being welded. The connection should be as close as possible to the area being welded.

3.e. Ground the work or metal to be welded to a good electrical (earth) ground.

3.f. Maintain the electrode holder, work clamp, welding cable and welding machine in good, safe operating condition. Replace damaged insulation.

3.g. Never dip the electrode in water for cooling.

3.h. Never simultaneously touch electrically “hot” parts of electrode holders connected to two welders because voltage between the two can be the total of the open circuit voltage of both welders.

3.i. When working above floor level, use a safety belt to protect yourself from a fall should you get a shock.

3.j. Also see Items 6.c. and 8.

ARC RAYS can burn.

4.a. Use a shield with the proper filter and cover plates to protect your eyes from sparks and the rays of the arc when welding or observing open arc welding. Headshield and filter lens should conform to ANSI Z87. I standards.

4.b. Use suitable clothing made from durable flame-resistant material to protect your skin and that of your helpers from the arc rays.

4.c. Protect other nearby personnel with suitable, non-flammable screening and/or warn them not to watch the arc nor expose themselves to the arc rays or to hot spatter or metal.

FUMES AND GASES can be dangerous.

5.a. Welding may produce fumes and gases hazardous to health. Avoid breathing these fumes and gases. When welding, keep your head out of the fume. Use enough ventilation and/or exhaust at the arc to keep

fumes and gases away from the breathing zone. When

welding with electrodes which require special ventilation such as stainless or hard facing (see instructions on container or MSDS) or on lead or cadmium plated steel and other metals or coatings which produce highly toxic fumes, keep exposure as low as possible and below Threshold Limit Values (TLV) using local exhaust or mechanical ventilation. In confined spaces or in some circumstances, outdoors, a respirator may be required. Additional precautions are also required when welding on galvanized steel.

5.b. The operation of welding fume control equipment is affected by various factors including proper use and positioning of the equipment, maintenance of the equipment and the spe- cific welding procedure and application involved. Worker exposure level should be checked upon installation and periodically thereafter to be certain it is within applicable OSHA PEL and ACGIH TLV limits.

5.c. Do not weld in locations near chlorinated hydrocarbon vapors coming from degreasing, cleaning or spraying operations. The heat and rays of the arc can react with solvent vapors to form phosgene, a highly toxic gas, and other irritating prod- ucts.

5.d. Shielding gases used for arc welding can displace air and cause injury or death. Always use enough ventilation, especially in confined areas, to insure breathing air is safe.

5.e. Read and understand the manufacturerʼs instructions for this equipment and the consumables to be used, including the material safety data sheet (MSDS) and follow your employerʼs safety practices. MSDS forms are available from your welding distributor or from the manufacturer.

5.f. Also see item 1.b.

AUG 06

COOL ARC® 40

Page 2 Page 4
Page 3
Image 3
Lincoln Electric IM670-A manual Electric Shock can kill
Page 2 Page 4

IM670-A specifications

The Lincoln Electric IM670-A is a state-of-the-art inverter-based multi-process welding machine, designed for versatility and efficiency across a range of welding applications. This model is specifically engineered to suit the needs of both novice and experienced welders, ensuring exceptional performance and ease of use.

One of the standout features of the IM670-A is its capability to handle a variety of welding processes including MIG, TIG, and Stick welding. This multi-process functionality makes it an ideal choice for fabrication shops, maintenance tasks, and DIY enthusiasts who require a tool that can adapt to different welding requirements. The unit is equipped with advanced inverter technology, which not only reduces the machine's overall size and weight but also enhances its energy efficiency. This means that the IM670-A provides excellent weld quality while consuming less power compared to traditional welding machines.

Moreover, the IM670-A boasts precise control over the welding parameters. The user-friendly interface comes with a digital display that allows welders to easily adjust voltage, wire feed speed, and other critical settings. This level of control contributes to a consistent and high-quality weld, catering to a wide range of materials, including stainless steel, aluminum, and mild steel.

In terms of safety, Lincoln Electric has integrated several protective features in the IM670-A. Over-voltage, under-voltage, and over-temperature protection systems ensure the machine operates safely even under demanding conditions. The robust design also allows for extended periods of use without overheating, making it a reliable choice for professionals.

Another key characteristic of the IM670-A is its portability. Weighing significantly less than traditional models, it comes with a convenient carrying handle, making it easy to transport to different job sites. Additionally, it operates efficiently on standard power outlets, eliminating the need for complex electrical setups.

Overall, the Lincoln Electric IM670-A is a powerful and versatile welding solution that combines advanced technology with user-friendly features. Its multi-process capabilities, precise control, safety mechanisms, and portability make it a valuable tool for welders across various industries. Whether for industrial, commercial, or personal projects, the IM670-A stands out as a reliable and efficient choice in the welding equipment market.
Top Page Image Contents