Lincoln Electric IM687 Operation, Product Description, Included Equipment, Welding Capability

B-1 OPERATION B-1

SAFETY PRECAUTIONS

Read and understand this entire section before operat- ing the machine.

WARNING

ELECTRIC SHOCK can kill.

•Do not touch electrically live parts or electrode with skin or wet cloth- ing.

•Insulate yourself from work and ground.

•Always wear dry insulating gloves.

•Read and follow “Electric Shock Warnings” in the Safety section if weld- ing must be performed under electrical- ly hazardous conditions such as weld- ing in wet areas or on or in the work- piece.

FUMES AND GASES can be dangerous.

•Keep your head out of fumes.

• Use ventilation or exhaust to remove fumes from breathing zone.

WELDING SPARKS

can cause fire or explosion

•Keep flammable material away.

•Do not weld on containers that have held combustibles.

PRODUCT DESCRIPTION

The SQUARE WAVE TIG 175 PRO is a constant cur- rent, single range AC/DC TIG (GTAW) arc welding power source with built-in arc starter / stabilizer. It also has stick welding (SMAW) capability.

The SQUARE WAVE TIG 175 PRO is recommended for the TIG (GTAW) and stick (SMAW) welding processes within its output capacity of 10 to 175 amps, on both AC and DC polarity.

INCLUDED EQUIPMENT

For GTAW (TIG Welding):

•TIG torch, factory assembled with:

•12.5 ft (3.8m) one-piece cable

•3/32” Collet body

•3/32” Collet

•Short backcap

Not assembled:

•3/32” x 7” 2% Thoriated Tungsten Electrode

•Long backcap

•1/2” Diameter Alumina gas cup

•Adjustable argon gas pressure regulator and flow gage

•Gas hose

•Foot Amptroltm remote current control with 15ft (4.6m) cable

For SMAW (Stick Welding):

•Electrode holder with cable and quick connect plug

•Electrode sample pack.

For Installation and startup:

•“How To” VHS Videotape

•Work Cable and Clamp

•Input Cord

•Input plug and receptacle (208/230 volt models only)

ARC RAYS can burn.

• Wear eye, ear and body protection.

Observe additional Safety Guidelines detailed in the beginning of this manual.

WELDING CAPABILITY

The SQUARE WAVE TIG 175 PRO is rated at 150 amps, 15 volts, at 25% duty cycle on a ten minute basis. It is capable of higher duty cycles at lower out- put currents. It is capable of 175 amps, 27 volts at a lower duty cycle. If the duty cycle is exceeded, a ther- mal protector will shut off the output until the machine

cools.

SQUARE WAVE TIG 175 PRO