ii

 

SAFETY

 

ii

 

 

 

 

 

 

 

 

 

ELECTRIC SHOCK can kill.

3.a. The electrode and work (or ground) circuits are electrically “hot” when the welder is on. Do not touch these “hot” parts with your bare skin or wet clothing. Wear dry, hole-free

gloves to insulate hands.

3.b. Insulate yourself from work and ground using dry insulation. Make certain the insulation is large enough to cover your full area of physical contact with work and ground.

In addition to the normal safety precautions, if welding must be performed under electrically hazardous conditions (in damp locations or while wearing wet clothing; on metal structures such as floors, gratings or scaffolds; when in cramped positions such as sitting, kneeling or lying, if there is a high risk of unavoidable or accidental contact with the workpiece or ground) use the following equipment:

Semiautomatic DC Constant Voltage (Wire) Welder.

DC Manual (Stick) Welder.

AC Welder with Reduced Voltage Control.

3.c. In semiautomatic or automatic wire welding, the electrode, electrode reel, welding head, nozzle or semiautomatic welding gun are also electrically “hot”.

3.d. Always be sure the work cable makes a good electrical connection with the metal being welded. The connection should be as close as possible to the area being welded.

3.e. Ground the work or metal to be welded to a good electrical (earth) ground.

3.f. Maintain the electrode holder, work clamp, welding cable and welding machine in good, safe operating condition. Replace damaged insulation.

3.g. Never dip the electrode in water for cooling.

3.h. Never simultaneously touch electrically “hot” parts of electrode holders connected to two welders because voltage between the two can be the total of the open circuit voltage of both welders.

3.i. When working above floor level, use a safety belt to protect yourself from a fall should you get a shock.

3.j. Also see Items 6.c. and 8.

ARC RAYS can burn.

4.a. Use a shield with the proper filter and cover plates to protect your eyes from sparks and the rays of the arc when welding or observing open arc welding. Headshield and filter lens should conform to ANSI Z87. I standards.

4.b. Use suitable clothing made from durable flame-resistant material to protect your skin and that of your helpers from the arc rays.

4.c. Protect other nearby personnel with suitable, non-flammable screening and/or warn them not to watch the arc nor expose themselves to the arc rays or to hot spatter or metal.

FUMES AND GASES can be dangerous.

5.a. Welding may produce fumes and gases hazardous to health. Avoid breathing these fumes and gases.When welding, keep your head out of the fume. Use enough ventilation and/or exhaust at the arc to keep

fumes and gases away from the breathing zone. When

welding with electrodes which require special ventilation such as stainless or hard facing (see instructions on container or MSDS) or on lead or cadmium plated steel and other metals or coatings which produce highly toxic fumes, keep exposure as low as possible and below Threshold Limit Values (TLV) using local exhaust or mechanical ventilation. In confined spaces or in some circumstances, outdoors, a respirator may be required. Additional precautions are also required when welding on galvanized steel.

5.b. Do not weld in locations near chlorinated hydrocarbon vapors coming from degreasing, cleaning or spraying operations. The heat and rays of the arc can react with solvent vapors to form phosgene, a highly toxic gas, and other irritating prod- ucts.

5.c. Shielding gases used for arc welding can displace air and cause injury or death. Always use enough ventilation, especially in confined areas, to insure breathing air is safe.

5.d. Read and understand the manufacturer’s instructions for this equipment and the consumables to be used, including the material safety data sheet (MSDS) and follow your employer’s safety practices. MSDS forms are available from your welding distributor or from the manufacturer.

5.e. Also see item 1.b.

Mar ‘95

POWER WAVE 455/R

Page 3
Image 3
Lincoln Electric IM690-A manual Electric Shock can kill

IM690-A specifications

The Lincoln Electric IM690-A is a sophisticated and versatile multi-process welding machine designed to cater to a wide range of professional welding applications. Combining innovative technology with robust functionality, the IM690-A stands out as a reliable choice for welders across various industries.

One of the primary features of the IM690-A is its multi-process capability, allowing users to perform MIG, TIG, and stick welding with ease. This versatility is essential for welders who need to switch between different welding techniques depending on the project requirements. The machine's advanced control system ensures a smooth transition between processes, optimizing the welder's performance and efficiency.

The IM690-A is powered by a high-performance inverter technology that significantly improves energy efficiency while providing a stable arc. In addition to power efficiency, this technology enables the machine to have a compact design, making it portable and easier to maneuver in tight spaces. The inverter technology also contributes to a reliable and consistent welding output, which is crucial for high-quality welds.

Another notable characteristic of the IM690-A is its user-friendly interface. The machine features a large digital display and intuitive controls, allowing welders to easily adjust settings and monitor performance parameters. This ease of use is particularly beneficial for beginners and experienced welders alike, facilitating quick adjustments during operation.

The IM690-A also incorporates advanced safety features, ensuring the well-being of the operator. Overload protection and automatic thermal shutdown provide peace of mind, allowing users to focus on their work without the constant worry of equipment failure. The rugged construction of the machine adds an extra layer of durability, making it suitable for demanding environments and extensive usage.

Additionally, the IM690-A supports a wide variety of materials and thicknesses, making it ideal for diverse applications, from automotive repair to heavy fabrication. With features like adjustable inductance settings and pre/post gas flow control, users can fine-tune their welding processes for optimal results.

In conclusion, the Lincoln Electric IM690-A is a powerful multi-process welder that combines advanced inverter technology with user-friendly design and safety features. Its versatility, efficiency, and adaptability make it an outstanding choice for professionals seeking a reliable welding solution. Whether you’re working in a shop or on-site, the IM690-A delivers exceptional performance and quality in a compact, durable package.