Lincoln Electric IM723-A manual Installation

A-1 INSTALLATION A-1

TECHNICAL SPECIFICATIONS – UNDER- WATER COOLER

	Model / Make			Under-Cooler Cart			K1828-1
	Input			100-120 VAC	50/60 Hz		1 Phase
	Rated Current Draw		60 Hz (2.8-3.5 Amps)				50 Hz (3.5-5.3 Amps)
	Operating Pressure			60 psig (413 kPa) (4.1 bar)
	Pump Hydraulic
	Rating	No Flow	Discharge Pressure (gage)
			(Relief Valve Setting)			60 PSIG (414 kPa) (4.14 bar) Max.
		No Pressure	Flow Rate			1.66 gal/min (6.28 liter/min) Max.
	Pump Hydraulic Rating
	(Typical Operation)		Discharge Pressure (gage)			53-57 PSIG (365-393 kPa)
			Flow Rate			.45-.60 gal/min (1.7-2.3 liter/min)
	Reservoir Capacity			2.0 Gallons (7.6 Liters)
			For Use Above Freezing: Clean tap, distilled, or de-ionized water
			For Use Below Freezing: 50% water and 50% pure ethylene glycol mixture.
	Recommended Coolant		DO NOT USE: Automotive anti-freeze that contains rust inhibitors or leak
			stoppers. These coolants will damage the pump and block the small internal
			passageways of the heat exchanger, affecting cooling performance. To
			acquire the proper coolant contact a local welding distributor.
			DO NOT USE: Pre-packaged welding industry coolants. These coolants may
			contain oil-based substances, which attack the plastic components of the
			cooler. Once added to the cooler, these substances are virtually impossible to
			purge from the water lines and heat exchanger.
Weight		Shipping		252 lbs. (114 kg)
		Reservoir Full (Water)		267 lbs. (121 kg)
	Dimensions	Length		41 in (1041 mm)
		Width		27 in (686 mm)
		Height (Top Face)		21 in ( 533mm )
		Height (TIG Interface)		19 in (483 mm)

UNDER-COOLER CART