RECOMMENDED EQUIPMENT
STICK
K704(400 Amp) or K875(150 Amp)Accessory Kit which includes:
•Electrode Holder & Cable
•Work Clamp & Cable
•Headshield
WIRE FEED
K449 LN-25 - Includes internal contactor for across the arc operation (no control cable). Provides “cold” electrode until gun trigger is pressed. Includes gas solenoid.
K1870-1 LN-15 Across the Arc Wire Feeder. Portable, lightweight, compact CC/CV unit for flux- cored and MIG welding. Includes Gas Solenoid, adjustable flow meter and internal contactor. For 10- 15 lb. (4.5-6.8kg) spools.
Magnum Gun and Magnum Gun Connector Kit are required for gas-shielded welding. Innershield Gun is required for gasless welding.
K126-2Magnum 350 Innershield Gun
K1802-1Magnum 300 MIG Gun (for LN-25)
K470-2Magnum 300 MIG Gun (for LN-15)(Includes Connector Kit)
K466-10Connector Kit (for LN-15, K470-2)
K1500-1Gun Receiver Bushing (for LN-15 & K126-2)
TIG
K1783-9 Pro -Torch® PTA-26V TIG Torch
Air Cooled 200 amp torch (2 piece) equipped with valve for gas flow control. 25 ft. (7.6m) length.
KP509 Magnum Parts Kit for PTA-26V TIG Torch Magnum Parts Kit provides all the torch accessories you need to start welding. Parts kit provides collets, collet bodies, a black cap, alumina nozzles and tung- stens in a variety of sizes, all packaged in an easy to carry reclosable sack.
K930-2 TIG Module
Requires K938-1 Contactor Kit,
K936-4 Control Cable, and K814
Arc Start Switch
Optional TIG Equipment:
K939-1 Docking Kit
K937-45 Control Cable Extensions
K844-1 Water Valve Kit
