Manuals / Indesit / Kitchen Appliance / Cooktop

Indesit KDP60E Space for Fixing, Cooker Hoods, Unpacking the Cooker, Levelling, Stability Chain

Models: KD6G35 KDP60E

1 20
Download 20 pages 3.49 Kb
Page 14
Image 14

Installation

 

SPACE FOR FIXING

GB

The cooker can be close fitted below hotplate level.

 

This requires a minimum distance of 600mm between

 

 

cupboard units of hotplate height.

 

When installing next to a tall cupboard, partition or

 

wall, for a minimum distance of 400mm above hotplate

 

level, allow a side clearance of at least 65mm.

 

The diagram below illustrates the minimum clearance

 

between the cooker and adjacent walls, cupboards

 

etc.

 

The wall behind the cooker, 50mm below and 450mm

 

above, and the width of the cooker, must be a non-

 

combustible material such as ceramic wall tiles.

 

If the cooker is to be fitted close to a corner on the left

 

hand side, ensure that there is a clearance of at least

 

50mm to allow the main oven door to open fully for

 

when removing oven shelves.

mmMin

Min

 

750mm

65 mm Min

 

 

400

 

 

 

600 mm Min

 

COOKER HOODS

If a cooker hood is to be installed, refer to the cooker hood manufacturers' instructions regarding fixing height.

UNPACKING THE COOKER

Unpack the components from inside the grill and oven.

Check that the following parts are present:

Grill pan and grid

Aluminium burner bodies (4)

Pan supports

Main oven shelves (2)

Enamelled burner caps (4)

Top oven/grill shelf (1)

Literature

 

LEVELLING

Four skid feet are fitted which can be adjusted up or down to level the cooker.

CONVERSION FOR USE ON BUTANE (G30) OR PROPANE (G31)

Each burner requires the injector to be replaced and bypass screws adjusted or replaced as follows:

1.Remove the loose hotplate burner parts.

2.Using a 7mm socket, replace the hotplate injectors as appropriate (see table on previous page).

3.Re-position the loose burner parts.

4.Carefully pull off the hotplate control knobs.

5.Using a narrow flat bladed screwdriver rotate the bypass screws fully clockwise. The hotplate tap bypass screws are located down the centre of the spindle.

6.Re-assemble the control panel parts.

7.Secure the self-adhesive LPG conversion label over the gas details on the data badge.

STABILITY CHAIN

A hole in the gas inlet valve bracket can be used to engage a stability chain.

CONNECTING TO GAS SUPPLY

670

300

Connection to the cooker should be made with an approved appliance flexible connection to BS 669. A length of 0.9 to 1.25m is recommended. The length of hose chosen should be such that when the cooker is in situ, the hose does not touch the floor.

Those cookers converted to use on LPG should be connected with a hose suitable for LPG and capable of withstanding a pressure of 50 mbar.

An adaptor backplate should be fitted within the shaded area shown, to allow the cooker to be pushed fully to the wall and to ensure that the flexible hose is only likely to come into contact with areas at the rear of the cooker that do not exceed a temperature rise of 70°C.

14

Page 13 Page 15
Page 14
Image 14
Indesit KDP60E Space for Fixing, Cooker Hoods, Unpacking the Cooker, Levelling, Stability Chain, Connecting to GAS Supply
Page 13 Page 15

KD6G35, KDP60E specifications

The Indesit KDP60E and KD6G35 are two highly regarded models in the realm of kitchen appliances, particularly known for their efficiency and practicality. These cookers are designed to meet the demands of modern kitchens while providing impeccable cooking experiences.

The Indesit KDP60E is a multifunctional double oven that boasts a variety of cooking options. With a total capacity of 102 liters, it offers ample space for preparing multiple dishes simultaneously. The top oven features a conventional function, perfect for dishes that require gentle heat, while the larger bottom oven uses fan assistance to ensure even cooking. A key characteristic of the KDP60E is its user-friendly interface, complete with mechanical controls and a clear display, allowing users to easily select the desired cooking mode.

One of the standout technologies of the KDP60E is its Energy Class A rating, which signifies efficiency in energy consumption. This model is equipped with a unique Hydro Easy Clean function that uses steam to break down dirt and grease, making the cleaning process quick and hassle-free. Additionally, the KDP60E includes four cooking zones and a1900W rapid heat burner, providing versatile options for simultaneous food preparation.

On the other hand, the Indesit KD6G35 is another excellent option, primarily known for its gas cooking capabilities. The KD6G35 features five gas burners, including a large wok burner for high-heat cooking or stir-frying. This model is acclaimed for its precise temperature control, allowing culinary enthusiasts to achieve desired results with exactitude.

The design of the KD6G35 is equally impressive, featuring a stylish stainless steel finish that not only looks great but ensures durability. Similar to the KDP60E, it also includes an energy-efficient oven with a capacity conducive to accommodating larger meals. A standout feature is the integrated grill, which facilitates browning and crisping of dishes for that perfect finish.

Both models prioritize safety, incorporating flame failure devices that cut off the gas supply if the flame goes out. The Indesit KDP60E and KD6G35 exemplify innovation in kitchen technology, combining aesthetic appeal with functionality to elevate the cooking experience while promoting ease of use and maintenance.